| 1 |
#-------------------------------------------------------------------- |
| 2 |
# A configure.in file for ASCEND. |
| 3 |
# |
| 4 |
# Process `configure.in' file with `autoconf' to produce |
| 5 |
# a `configure' script. This `configure.in' was prepared |
| 6 |
# for AutoConf v2.59. |
| 7 |
#-------------------------------------------------------------------- |
| 8 |
|
| 9 |
#-------------------------------------------------------------------- |
| 10 |
# Disable caching since it seems to get in the way |
| 11 |
# more times than it helps us. |
| 12 |
#-------------------------------------------------------------------- |
| 13 |
define([AC_CACHE_LOAD], )dnl |
| 14 |
define([AC_CACHE_SAVE], )dnl |
| 15 |
|
| 16 |
|
| 17 |
#-------------------------------------------------------------------- |
| 18 |
# This file must exist for configure to continue. It's |
| 19 |
# how we know we're in the right place. |
| 20 |
#-------------------------------------------------------------------- |
| 21 |
##AWW20041113: AC_INIT(ascend4/compiler/ascParse.y) |
| 22 |
AC_INIT(../generic/compiler/ascParse.y) |
| 23 |
|
| 24 |
|
| 25 |
#-------------------------------------------------------------------- |
| 26 |
# CVS Most Recent Revision Data |
| 27 |
# Put this data after AC_INIT since we want this information |
| 28 |
# to also appear in configure and autoconf, when creating |
| 29 |
# configure, strips all comments that appear in configure.in |
| 30 |
# before AC_INIT |
| 31 |
# $Revision: 1.38 $ |
| 32 |
# $Date: 2003/11/23 19:36:39 $ |
| 33 |
# $Author: ballan $ |
| 34 |
# $Source: /afs/cs.cmu.edu/project/ascend/Repository/configure.in,v $ |
| 35 |
#-------------------------------------------------------------------- |
| 36 |
|
| 37 |
|
| 38 |
#-------------------------------------------------------------------- |
| 39 |
# Where configure should look for files it needs. |
| 40 |
#-------------------------------------------------------------------- |
| 41 |
AC_CONFIG_AUX_DIR(config) |
| 42 |
|
| 43 |
#-------------------------------------------------------------------- |
| 44 |
# Set the output variables prefix and exec_prefix that |
| 45 |
# determine where things will be installed. |
| 46 |
#-------------------------------------------------------------------- |
| 47 |
if test "${prefix}" = "NONE"; then |
| 48 |
prefix=/usr/local |
| 49 |
fi |
| 50 |
if test "${exec_prefix}" = "NONE"; then |
| 51 |
exec_prefix=$prefix |
| 52 |
fi |
| 53 |
|
| 54 |
|
| 55 |
#-------------------------------------------------------------------- |
| 56 |
# For the Fortran support libraries and the TCL/TK libraries |
| 57 |
# and header files, we unfortunately need the full path to |
| 58 |
# these files. The problem with having the full path is that |
| 59 |
# if the user moves the source tree, things will break unless |
| 60 |
# the user re-runs configure. |
| 61 |
#-------------------------------------------------------------------- |
| 62 |
|
| 63 |
#-------------------------------------------------------------------- |
| 64 |
##AWW |
| 65 |
##AWW We put the .o files when compiling into a tree structure |
| 66 |
##AWW relative to the directory in which we currently reside, |
| 67 |
##AWW while the .c and .h files are in a similar tree structure |
| 68 |
##AWW relative to the configure instruction we invoke. This |
| 69 |
##AWW allows one to have separate .o files in their own tree when |
| 70 |
##AWW compiling for different operating systems. |
| 71 |
##AWW |
| 72 |
##AWW Example 1 (same directories) |
| 73 |
##AWW Current directory one is in: /home/me/trunk/base/unixAC213 |
| 74 |
##AWW Directory containing configure: /home/me/trunk/base/unixAC213 |
| 75 |
##AWW Command to invoke configure: ./configure |
| 76 |
##AWW $ascpwd will be: /home/me/trunk/base/unixAC213 |
| 77 |
##AWW $srcdir will be: . |
| 78 |
##AWW |
| 79 |
##AWW Example 2 (different directories, abs path for command) |
| 80 |
##AWW Current directory one is in: /home/me/trunk/base/newTree |
| 81 |
##AWW Directory containing configure: /home/me/trunk/base/unixAC213 |
| 82 |
##AWW Command to invoke configure: /home/me/trunk/base/unixAC213/configure |
| 83 |
##AWW $ascpwd will be: /home/me/trunk/base/newTree |
| 84 |
##AWW $srcdir will be: /home/me/trunk/base/unixAC213 |
| 85 |
##AWW |
| 86 |
##AWW Example 3 (different directories, rel path for command) |
| 87 |
##AWW Same as Example 2 |
| 88 |
##AWW Command to invoke configure: ../unixAC213/configure |
| 89 |
##AWW $ascpwd will be: /home/me/trunk/base/newTree (same as in Example 2) |
| 90 |
##AWW $srcdir will be: ../unixAC213 |
| 91 |
##AWW |
| 92 |
##AWW Key elements of the source tree are: |
| 93 |
##AWW code/trunk/trunk/base/unixAC213/configure |
| 94 |
##AWW code/trunk/trunk/base/generic |
| 95 |
##AWW code/trunk/tcltk98 |
| 96 |
##AWW where $srcdir is pointing to /home/me/trunk/base/unixAC213, the folder |
| 97 |
##AWW containing "configure" |
| 98 |
##AWW |
| 99 |
##AWW Configure is located at: |
| 100 |
##AWW $srcdir/configure |
| 101 |
##AWW while the .c/.h files one wants are in: |
| 102 |
##AWW $srcdir/../generic/compiler |
| 103 |
##AWW $srcdir/../generic/general |
| 104 |
##AWW $srcdir/../generic/packages |
| 105 |
##AWW $srcdir/../generic/solver |
| 106 |
##AWW $srcdir/../generic/utilities |
| 107 |
##AWW $srcdir/../../tcltk98/generic/interface |
| 108 |
##AWW |
| 109 |
##AWW Each of these directories contain Makefiles and possible |
| 110 |
##AWW need to find .h files in the other directories. For example |
| 111 |
##AWW the include statements are always of the form |
| 112 |
##AWW #include compiler/slv3.h or |
| 113 |
##AWW #include interface/SlvProc.h |
| 114 |
##AWW |
| 115 |
##AWW A safe include path should assume one is a directory with any |
| 116 |
##AWW of these .h and .c files and one needs to find a .h file in |
| 117 |
##AWW any other of them. The following paths should do it. |
| 118 |
##AWW |
| 119 |
##AWW If in compiler, general, packages, solver, utilities |
| 120 |
##AWW .. for general, packages, etc |
| 121 |
##AWW ../../../tcltk98/generic for interface |
| 122 |
##AWW If in interface |
| 123 |
##AWW .. for interface |
| 124 |
##AWW ../../../base/generic for compiler, general, .. |
| 125 |
##AWW |
| 126 |
#-------------------------------------------------------------------- |
| 127 |
# The asc_include variable is (directory) path to the ascend4 |
| 128 |
# SOURCE directory relative to the immediate subdirectories of |
| 129 |
# the ascend4 OBJECT directory. --rewrite - not clear. |
| 130 |
#AWW To compile a new ASCEND executable, one should move into the |
| 131 |
#AWW directory in which one wants the ASCEND object/executable |
| 132 |
#AWW to reside (call this objTree) and from there run |
| 133 |
#AWW ../base/unixAC213/configure. |
| 134 |
#AWW In the following code asc_include is set to the path from |
| 135 |
|
| 136 |
ascpwd=`pwd` |
| 137 |
fullpathsrcdir=`cd $srcdir ; pwd` |
| 138 |
|
| 139 |
case "$srcdir" in |
| 140 |
.) |
| 141 |
asc_include="../$srcdir" |
| 142 |
;; |
| 143 |
/*) |
| 144 |
#AWW20041113: asc_include="$srcdir/ascend4" |
| 145 |
asc_include="$srcdir/../generic" |
| 146 |
;; |
| 147 |
*) |
| 148 |
#AWW20041113: asc_include="../../$srcdir/ascend4" |
| 149 |
asc_include="$srcdir/../generic" |
| 150 |
;; |
| 151 |
esac |
| 152 |
|
| 153 |
|
| 154 |
#-------------------------------------------------------------------- |
| 155 |
# Do basic checks to determine |
| 156 |
# * if we have `ranlib' |
| 157 |
# * if we can create symbolic links |
| 158 |
# * if `make' sets the MAKE macro |
| 159 |
# * a bsd-compatible `install' program |
| 160 |
# If we use the install-sh script that comes with configure, |
| 161 |
# prefix it with the current directory so it'll work in |
| 162 |
# subdirectories. Unfortunately, it won't work if the user |
| 163 |
# moves the source tree. |
| 164 |
#-------------------------------------------------------------------- |
| 165 |
AC_PROG_RANLIB |
| 166 |
AC_PROG_LN_S |
| 167 |
AC_PROG_MAKE_SET |
| 168 |
AC_PROG_INSTALL |
| 169 |
##AWW20041113: No fixing seems necessary. |
| 170 |
case "X$INSTALL" in |
| 171 |
X/*) |
| 172 |
;; |
| 173 |
*) |
| 174 |
INSTALL="$ascpwd/$INSTALL" |
| 175 |
;; |
| 176 |
esac |
| 177 |
|
| 178 |
|
| 179 |
#-------------------------------------------------------------------- |
| 180 |
# Get the host type for various checks along the way |
| 181 |
#-------------------------------------------------------------------- |
| 182 |
AC_CANONICAL_HOST |
| 183 |
|
| 184 |
|
| 185 |
#-------------------------------------------------------------------- |
| 186 |
# Check for the C compiler: set CC and CFLAGS. |
| 187 |
# If the user does NOT specify `--enable-gcc' on the configure |
| 188 |
# command command line, set CC to either the envar CC or `cc'. |
| 189 |
# Call AC_PROG_CC which will use the value of CC (perhaps set |
| 190 |
# immediately above) or will check for `gcc' and then for `cc' |
| 191 |
# if `gcc' is not found. |
| 192 |
# |
| 193 |
# If we are using GCC, then assume it groks ANSI. Otherwise, |
| 194 |
# try to compile a small program using ANSI constructs with |
| 195 |
# CC. If this fails, try to locate each of the following: |
| 196 |
# c89 xlc acc |
| 197 |
# and if successful, see if it compiles an ANSI C program. |
| 198 |
# (Doing this in a loop would be ideal, but configure caches |
| 199 |
# the result of AC_CHECK_PROG and uses the cached value for |
| 200 |
# all but the first pass through the loop. This is also the |
| 201 |
# reason we have to use a different variable asc_cc1, asc_cc2 |
| 202 |
# for each call to AC_CHECK_PROG. |
| 203 |
# |
| 204 |
# If we do not find an ANSI C compiler, print a warning and |
| 205 |
# use the first value of CC we tried. |
| 206 |
#-------------------------------------------------------------------- |
| 207 |
|
| 208 |
AC_ARG_ENABLE(gcc, |
| 209 |
[ |
| 210 |
ASCEND specific options |
| 211 |
|
| 212 |
Compiler options: |
| 213 |
--enable-gcc allow use of gcc if avaiable], |
| 214 |
[asc_gcc_ok=$enableval], [asc_gcc_ok=no]) |
| 215 |
if test ! "$asc_gcc_ok" = "yes"; then |
| 216 |
CC=${CC-cc} |
| 217 |
fi |
| 218 |
asc_orig_cc=$CC |
| 219 |
|
| 220 |
if test "X$asc_gcc_ok" = "Xyes" ; then |
| 221 |
asc_ansi_ok=yes |
| 222 |
else |
| 223 |
AC_MSG_CHECKING( |
| 224 |
[whether $CC understands const, void*, and function prototypes]) |
| 225 |
AC_TRY_COMPILE( , [ |
| 226 |
int tstproto(int arg1, char * arg2); |
| 227 |
int tstconst(const int arg1, const char *arg2); |
| 228 |
int tstvoidp(const int arg1, const void *arg2); ], |
| 229 |
[ asc_ansi_ok=yes ], [ asc_ansi_ok=no ]) |
| 230 |
AC_MSG_RESULT($asc_ansi_ok) |
| 231 |
fi |
| 232 |
|
| 233 |
if test "$asc_ansi_ok" = no ; then |
| 234 |
AC_CHECK_PROG(asc_cc1, c89, c89, NONE) |
| 235 |
if test ! "$asc_cc1" = NONE ; then |
| 236 |
CC=$asc_cc1 |
| 237 |
AC_MSG_CHECKING( |
| 238 |
[whether $CC understands const, void*, and function prototypes]) |
| 239 |
AC_TRY_COMPILE( , [ |
| 240 |
int tstproto(int arg1, char * arg2); |
| 241 |
int tstconst(const int arg1, const char *arg2); |
| 242 |
int tstvoidp(const int arg1, const void *arg2); ], |
| 243 |
[ asc_ansi_ok=yes ], [ asc_ansi_ok=no ]) |
| 244 |
AC_MSG_RESULT($asc_ansi_ok) |
| 245 |
fi |
| 246 |
fi |
| 247 |
|
| 248 |
if test "$asc_ansi_ok" = no ; then |
| 249 |
AC_CHECK_PROG(asc_cc2, xlc, xlc, NONE) |
| 250 |
if test ! "$asc_cc2" = NONE ; then |
| 251 |
CC=$asc_cc2 |
| 252 |
AC_MSG_CHECKING( |
| 253 |
[whether $CC understands const, void*, and function prototypes]) |
| 254 |
AC_TRY_COMPILE( , [ |
| 255 |
int tstproto(int arg1, char * arg2); |
| 256 |
int tstconst(const int arg1, const char *arg2); |
| 257 |
int tstvoidp(const int arg1, const void *arg2); ], |
| 258 |
[ asc_ansi_ok=yes ], [ asc_ansi_ok=no ]) |
| 259 |
AC_MSG_RESULT($asc_ansi_ok) |
| 260 |
fi |
| 261 |
fi |
| 262 |
|
| 263 |
if test "$asc_ansi_ok" = no ; then |
| 264 |
AC_CHECK_PROG(asc_cc3, acc, acc, NONE) |
| 265 |
if test ! "$asc_cc3" = NONE ; then |
| 266 |
CC=$asc_cc3 |
| 267 |
AC_MSG_CHECKING( |
| 268 |
[whether $CC understands const, void*, and function prototypes]) |
| 269 |
AC_TRY_COMPILE( , [ |
| 270 |
int tstproto(int arg1, char * arg2); |
| 271 |
int tstconst(const int arg1, const char *arg2); |
| 272 |
int tstvoidp(const int arg1, const void *arg2); ], |
| 273 |
[ asc_ansi_ok=yes ], [ asc_ansi_ok=no ]) |
| 274 |
AC_MSG_RESULT($asc_ansi_ok) |
| 275 |
fi |
| 276 |
fi |
| 277 |
|
| 278 |
AC_PROG_CC |
| 279 |
|
| 280 |
if test "$asc_ansi_ok" = no ; then |
| 281 |
CC=$asc_orig_cc |
| 282 |
AC_MSG_ERROR([Cannot find an ANSI C compiler. ASCEND will not build |
| 283 |
without an ANSI compiler. If you have an ANSI compiler which |
| 284 |
configure is not finding, set the CC environment variable to |
| 285 |
the full path fo the compiler and rerun configure.]) |
| 286 |
fi |
| 287 |
|
| 288 |
|
| 289 |
#-------------------------------------------------------------------- |
| 290 |
# Do other misc checks with CC and CFLAGS. |
| 291 |
# |
| 292 |
# Determine how to run the C preprocessor. |
| 293 |
# |
| 294 |
# If the user specifies --enable-optimization, remove `-g' |
| 295 |
# from CFLAGS, add `-O' to CFLAGS, and define `NDEBUG'. If |
| 296 |
# we are not building optimized, check for special libraries |
| 297 |
# needed for building a debugging binary (currenly only |
| 298 |
# /usr/lib/end.o under HPUX). |
| 299 |
# |
| 300 |
# Check if we're running on AIX; if so, add `-D_ALL_SOURCE' |
| 301 |
# to CFLAGS. |
| 302 |
# |
| 303 |
# Check if we're running on HPUX; if so, add -D_HPUX_SOURCE' |
| 304 |
# to CFLAGS unless the C preprocessor goes it for us. |
| 305 |
#-------------------------------------------------------------------- |
| 306 |
|
| 307 |
AC_PROG_CPP |
| 308 |
|
| 309 |
AC_ARG_ENABLE(optimization, |
| 310 |
[ --enable-optimization optimize the C code while building ascend], |
| 311 |
[asc_do_opt="$enableval"], [asc_do_opt=no]) |
| 312 |
if test "$asc_do_opt" = yes; then |
| 313 |
CFLAGS=`echo "-O $CFLAGS " | sed 's/ -g / /g'` |
| 314 |
AC_DEFINE(NDEBUG) |
| 315 |
else |
| 316 |
AC_PATH_PROG(DEBUG_LIBS, end.o, , /usr/lib) |
| 317 |
fi |
| 318 |
|
| 319 |
AC_MSG_CHECKING([for AIX]) |
| 320 |
AC_EGREP_CPP(yes, [ |
| 321 |
#ifdef _AIX |
| 322 |
yes |
| 323 |
#endif |
| 324 |
], [ asc_aix=yes ; AC_DEFINE(_ALL_SOURCE) ], [asc_aix=no]) |
| 325 |
AC_MSG_RESULT($asc_aix) |
| 326 |
|
| 327 |
AC_MSG_CHECKING([whether -D_HPUX_SOURCE is needed]) |
| 328 |
AC_EGREP_CPP(yes, [ |
| 329 |
#ifdef __hpux |
| 330 |
#ifndef _HPUX_SOURCE |
| 331 |
yes |
| 332 |
#endif |
| 333 |
#endif |
| 334 |
], [ asc_hpux=yes ; AC_DEFINE(_HPUX_SOURCE) ], [asc_hpux=no]) |
| 335 |
AC_MSG_RESULT($asc_hpux) |
| 336 |
|
| 337 |
# Check the size of pointers; if cross compiling, assume 32 bit pointers |
| 338 |
AC_CHECK_SIZEOF(void *, 4) |
| 339 |
|
| 340 |
|
| 341 |
#-------------------------------------------------------------------- |
| 342 |
# Set YACC. |
| 343 |
# See if we can find `yacc' ourselves; if not, call the |
| 344 |
# autoconf macro which looks for `bison' and then for `yacc' |
| 345 |
#-------------------------------------------------------------------- |
| 346 |
asc_found_yacc=0 |
| 347 |
AC_CHECK_PROG(YACC, yacc, yacc, [asc_found_yacc=no]) |
| 348 |
if test "$asc_found_yacc" = no ; then |
| 349 |
AC_PROG_YACC |
| 350 |
fi |
| 351 |
|
| 352 |
|
| 353 |
#-------------------------------------------------------------------- |
| 354 |
# Set LEX. |
| 355 |
# ASCEND requires a `flex' which understands -P (allows you to |
| 356 |
# specify a prefix other than `yy'). The -P flag was added at |
| 357 |
# the same time a -V (version) flag was added (version 2.4.1), |
| 358 |
# so if `flex' understands -V, it'll understand -P (checking |
| 359 |
# for -P directly requires a flex input file). |
| 360 |
# |
| 361 |
# 1. If `LEX' is not set, look for `flex' and set `LEX' to |
| 362 |
# `flex' if found. |
| 363 |
# 2. If `flex' was found, see if it understands -V. If so, |
| 364 |
# set `scanner_src' and `typer_src' to have `flex' generate |
| 365 |
# the C files from the flex input files |
| 366 |
# base/generic/compiler/scanner.l & tcltk98/interface/typelex.l |
| 367 |
# We don't need to look for libfl.a since we define |
| 368 |
# yywrap() ourselves. |
| 369 |
# 3. If `flex' wasn't found or was found but isn't new enough: |
| 370 |
# a. Print a warning message |
| 371 |
# b. Set `scanner_src' and `typer_src' to use pre-generated |
| 372 |
# C files for the flex files mentioned in (2). |
| 373 |
# c. Set `LEX' to `lex' |
| 374 |
# d. Search for the lex library `libl.a' and set LEXLIB to |
| 375 |
# its location. |
| 376 |
#-------------------------------------------------------------------- |
| 377 |
AC_CHECK_PROG(LEX, flex, flex) |
| 378 |
|
| 379 |
if test -n "$LEX" ; then |
| 380 |
AC_MSG_CHECKING([whether $LEX is at least version 2.4.1]) |
| 381 |
echo "$LEX -V" 1>&5 |
| 382 |
if $LEX -V 1>&5 2>&5 ; then |
| 383 |
AC_MSG_RESULT(yes) |
| 384 |
scanner_src="scanner.c.from.flex" |
| 385 |
typer_src="typelex.c.from.flex" |
| 386 |
else |
| 387 |
AC_MSG_RESULT(no) |
| 388 |
LEX='' |
| 389 |
fi |
| 390 |
fi |
| 391 |
|
| 392 |
if test -z "$LEX" ; then |
| 393 |
AC_MSG_WARN([Cannot find a flex lexer version 2.4.1 or greater. |
| 394 |
Using pregenerated C files for base/generic/compiler/scanner.l |
| 395 |
and tcltk98/interface/typelex.l. If you have flex 2.4.1 |
| 396 |
or newer, set the LEX environment variable to its location |
| 397 |
and run configure again.]) |
| 398 |
scanner_src="scanner.c.from.c" |
| 399 |
typer_src="typelex.c.from.c" |
| 400 |
|
| 401 |
# let configure set LEX and LEXLIB even though we won't be using them |
| 402 |
AC_PROG_LEX |
| 403 |
fi |
| 404 |
|
| 405 |
|
| 406 |
#-------------------------------------------------------------------- |
| 407 |
# Math libraries. |
| 408 |
# On a few very rare systems, all of the libm.a stuff is |
| 409 |
# already in libc.a. Set compiler flags accordingly. |
| 410 |
# Also, Linux requires the "ieee" library for math to work |
| 411 |
# right (and it must appear before "-lm"). |
| 412 |
# |
| 413 |
# When building on HPUX with GCC, GCC cannot find `copysign' |
| 414 |
# because it lives in an odd place; see if we need to add |
| 415 |
# this odd place to MATH_LIBS. |
| 416 |
# |
| 417 |
# See if erf(), the error function, exists; if so, define |
| 418 |
# HAVE_ERF. |
| 419 |
#-------------------------------------------------------------------- |
| 420 |
AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm") |
| 421 |
|
| 422 |
AC_CHECK_LIB(ieee, printf, [MATH_LIBS="-lieee $MATH_LIBS"]) |
| 423 |
|
| 424 |
if test -n "$MATH_LIBS" ; then |
| 425 |
AC_CHECK_LIB(m, copysign, , |
| 426 |
AC_CHECK_LIB(m, drem, [MATH_LIBS="$MATH_LIBS /lib/pa1.1/libM.a"] |
| 427 |
, , /lib/pa1.1/libM.a |
| 428 |
), |
| 429 |
$MATH_LIBS) |
| 430 |
fi |
| 431 |
|
| 432 |
# store the current list of libraries, add the math libraries to LIBS, |
| 433 |
# check for erf(), then reset the value of LIBS. |
| 434 |
asc_keep_LIBS="$LIBS" |
| 435 |
LIBS="$LIBS $MATH_LIBS" |
| 436 |
AC_CHECK_FUNCS(erf) |
| 437 |
LIBS="$asc_keep_LIBS" |
| 438 |
|
| 439 |
|
| 440 |
#-------------------------------------------------------------------- |
| 441 |
# Check for X11. |
| 442 |
# We'll use the simple autoconf builtin macro for finding |
| 443 |
# X11 until we find a reason not to. |
| 444 |
# |
| 445 |
# On Solaris and IRIX, add the path to the X library to the |
| 446 |
# run-time shared-library-search-path so the ASCEND binary |
| 447 |
# can find the X library without the user having to set |
| 448 |
# LD_LIBRARY_PATH |
| 449 |
#-------------------------------------------------------------------- |
| 450 |
AC_PATH_X |
| 451 |
if test -n "$x_includes"; then |
| 452 |
X11_INCLUDES="-I$x_includes" |
| 453 |
fi |
| 454 |
if test -n "$x_libraries"; then |
| 455 |
X11_LIBRARIES="-L$x_libraries" |
| 456 |
case "$host" in |
| 457 |
sparc-sun-solaris*) |
| 458 |
X11_RUN_PATH="-R$x_libraries" |
| 459 |
;; |
| 460 |
mips-sgi-irix*) |
| 461 |
X11_RUN_PATH="-rpath $x_libraries" |
| 462 |
;; |
| 463 |
*) |
| 464 |
X11_RUN_PATH="" |
| 465 |
;; |
| 466 |
esac |
| 467 |
fi |
| 468 |
|
| 469 |
|
| 470 |
#-------------------------------------------------------------------- |
| 471 |
# Check for the existence of various libraries. The order here |
| 472 |
# is important, so that then end up in the right order in the |
| 473 |
# command line generated by make. The -lsocket and -lnsl |
| 474 |
# libraries require a couple of special tricks: |
| 475 |
# 1. Use "connect" and "accept" to check for -lsocket, and |
| 476 |
# "gethostbyname" to check for -lnsl. |
| 477 |
# 2. Use each function name only once: can't redo a check |
| 478 |
# because autoconf caches the results of the last check |
| 479 |
# and won't redo it. |
| 480 |
# 3. Use -lnsl and -lsocket only if they supply procedures that |
| 481 |
# aren't already present in the normal libraries. This is |
| 482 |
# because IRIX 5.2 has libraries, but they aren't needed and |
| 483 |
# they're bogus: they goof up name resolution if used. |
| 484 |
# 4. On some SVR4 systems, can't use -lsocket without -lnsl |
| 485 |
# too. To get around this problem, check for both libraries |
| 486 |
# together if -lsocket doesn't work by itself. |
| 487 |
#-------------------------------------------------------------------- |
| 488 |
dnl AC_CHECK_LIB(Xbsd, printf, [LIBS="$LIBS -lXbsd"]) |
| 489 |
|
| 490 |
asc_checkBoth=0 |
| 491 |
AC_CHECK_FUNC(connect, [asc_checkSocket=0], [asc_checkSocket=1]) |
| 492 |
if test "$asc_checkSocket" = 1; then |
| 493 |
AC_CHECK_LIB(socket, printf, [X11_EXTRA_LIBS="-lsocket"],[asc_checkBoth=1]) |
| 494 |
fi |
| 495 |
if test "$asc_checkBoth" = 1; then |
| 496 |
asc_oldLibs=$LIBS |
| 497 |
X11_EXTRA_LIBS="-lsocket -lnsl" |
| 498 |
LIBS="$LIBS $X11_EXTRA_LIBS" |
| 499 |
AC_CHECK_FUNC(accept, asc_checkNsl=0, [X11_EXTRA_LIBS=""]) |
| 500 |
LIBS=$asc_oldLibs |
| 501 |
fi |
| 502 |
asc_oldLibs=$LIBS |
| 503 |
LIBS="$LIBS $X11_EXTRA_LIBS" |
| 504 |
AC_CHECK_FUNC(gethostbyname, , |
| 505 |
AC_CHECK_LIB(nsl, printf, [X11_EXTRA_LIBS="$X11_EXTRA_LIBS -lnsl"])) |
| 506 |
LIBS=$asc_oldLibs |
| 507 |
|
| 508 |
|
| 509 |
#-------------------------------------------------------------------- |
| 510 |
# The following comes directly from the configure.in file for |
| 511 |
# Tcl8.0. |
| 512 |
# |
| 513 |
# The statements below define a collection of symbols related to |
| 514 |
# dynamic loading and shared libraries: |
| 515 |
# |
| 516 |
# DL_OBJS - Name of the object file that implements dynamic |
| 517 |
# loading for ASCEND on this system. |
| 518 |
# DL_LIBS - Library file(s) to include in tclsh and other base |
| 519 |
# applications in order for the "load" command to work. |
| 520 |
# LD_FLAGS - Flags to pass to the compiler when linking object |
| 521 |
# files into an executable application binary such |
| 522 |
# as tclsh. |
| 523 |
# LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib", |
| 524 |
# that tell the run-time dynamic linker where to look |
| 525 |
# for shared libraries such as libtcl.so. Depends on |
| 526 |
# the variable LIB_RUNTIME_DIR in the Makefile. |
| 527 |
# MAKE_LIB - Command to execute to build the ASCEND library; |
| 528 |
# differs depending on whether or not ASCEND is being |
| 529 |
# compiled as a shared library. |
| 530 |
# SHLIB_CFLAGS - Flags to pass to cc when compiling the components |
| 531 |
# of a shared library (may request position-independent |
| 532 |
# code, among other things). |
| 533 |
# SHLIB_LD - Base command to use for combining object files |
| 534 |
# into a shared library. |
| 535 |
# SHLIB_LD_LIBS - Dependent libraries for the linker to scan when |
| 536 |
# creating shared libraries. This symbol typically |
| 537 |
# goes at the end of the "ld" commands that build |
| 538 |
# shared libraries. The value of the symbol is |
| 539 |
# "${LIBS}" if all of the dependent libraries should |
| 540 |
# be specified when creating a shared library. If |
| 541 |
# dependent libraries should not be specified (as on |
| 542 |
# SunOS 4.x, where they cause the link to fail, or in |
| 543 |
# general if ASCEND and Tk aren't themselves shared |
| 544 |
# libraries), then this symbol has an empty string |
| 545 |
# as its value. |
| 546 |
# SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable |
| 547 |
# extensions. An empty string means we don't know how |
| 548 |
# to use shared libraries on this platform. |
| 549 |
# ASC_LIB_FILE - Name of the file that contains the ASCEND library, such |
| 550 |
# as libtcl7.8.so or libtcl7.8.a. |
| 551 |
# ASC_LIB_SUFFIX -Specifies everything that comes after the "libtcl" |
| 552 |
# in the shared library name, using the $VERSION variable |
| 553 |
# to put the version in the right place. This is used |
| 554 |
# by platforms that need non-standard library names. |
| 555 |
# Examples: ${VERSION}.so.1.1 on NetBSD, since it needs |
| 556 |
# to have a version after the .so, and ${VERSION}.a |
| 557 |
# on AIX, since the ASCEND shared library needs to have |
| 558 |
# a .a extension whereas shared objects for loadable |
| 559 |
# extensions have a .so extension. Defaults to |
| 560 |
# ${VERSION}${SHLIB_SUFFIX}. |
| 561 |
#-------------------------------------------------------------------- |
| 562 |
|
| 563 |
# Step 1: set the variable "system" to hold the name and version number |
| 564 |
# for the system. This can usually be done via the "uname" command, but |
| 565 |
# there are a few systems, like Next, where this doesn't work. |
| 566 |
|
| 567 |
# Changed this to use the "$host" variable from AC_CANONICAL_HOST |
| 568 |
|
| 569 |
# Step 2: check for existence of -ldl library. This is needed because |
| 570 |
# Linux can use either -ldl or -ldld for dynamic loading. |
| 571 |
|
| 572 |
AC_CHECK_LIB(dl, dlopen, have_dl=yes, have_dl=no) |
| 573 |
|
| 574 |
# Step 3: set configuration options based on system name and version. |
| 575 |
|
| 576 |
ASC_SHARED_LIB_SUFFIX="" |
| 577 |
ASC_UNSHARED_LIB_SUFFIX="" |
| 578 |
ASC_LIB_VERSIONS_OK=ok |
| 579 |
case $host in |
| 580 |
*-aix*) |
| 581 |
SHLIB_CFLAGS="" |
| 582 |
SHLIB_LD="$fullpathsrcdir/ldAix /bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512" |
| 583 |
SHLIB_LD_LIBS='${LIBS}' |
| 584 |
SHLIB_SUFFIX=".so" |
| 585 |
DL_OBJS="" |
| 586 |
DL_LIBS="-lld" |
| 587 |
LD_FLAGS="" |
| 588 |
LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' |
| 589 |
ASC_SHARED_LIB_SUFFIX='${VERSION}.a' |
| 590 |
;; |
| 591 |
*-bsdi*) |
| 592 |
SHLIB_CFLAGS="" |
| 593 |
SHLIB_LD="shlicc -r" |
| 594 |
SHLIB_LD_LIBS='${LIBS}' |
| 595 |
SHLIB_SUFFIX=".so" |
| 596 |
DL_OBJS="" |
| 597 |
DL_LIBS="-ldl" |
| 598 |
LD_FLAGS="" |
| 599 |
LD_SEARCH_FLAGS="" |
| 600 |
;; |
| 601 |
*-dgux*) |
| 602 |
SHLIB_CFLAGS="-K PIC" |
| 603 |
SHLIB_LD="cc -G" |
| 604 |
SHLIB_LD_LIBS="" |
| 605 |
SHLIB_SUFFIX=".so" |
| 606 |
DL_OBJS="" |
| 607 |
DL_LIBS="-ldl" |
| 608 |
LD_FLAGS="" |
| 609 |
LD_SEARCH_FLAGS="" |
| 610 |
;; |
| 611 |
*-hpux8*|*-hpux9*|*-hpux10*) |
| 612 |
AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) |
| 613 |
if test "$tcl_ok" = yes; then |
| 614 |
SHLIB_CFLAGS="+z" |
| 615 |
SHLIB_LD="ld -b" |
| 616 |
SHLIB_LD_LIBS="" |
| 617 |
SHLIB_SUFFIX=".sl" |
| 618 |
DL_OBJS="" |
| 619 |
DL_LIBS="-ldld" |
| 620 |
LD_FLAGS="-Wl,-E" |
| 621 |
LD_SEARCH_FLAGS='-Wl,+b,${LIB_RUNTIME_DIR}:.' |
| 622 |
fi |
| 623 |
;; |
| 624 |
*-irix4*) |
| 625 |
SHLIB_CFLAGS="-G 0" |
| 626 |
SHLIB_SUFFIX=".a" |
| 627 |
SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" |
| 628 |
SHLIB_LD_LIBS='${LIBS}' |
| 629 |
DL_OBJS="" |
| 630 |
DL_LIBS="" |
| 631 |
LD_FLAGS="-Wl,-D,08000000" |
| 632 |
LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' |
| 633 |
ASC_SHARED_LIB_SUFFIX='${VERSION}.a' |
| 634 |
;; |
| 635 |
*-irix5*|*-irix6.*) |
| 636 |
SHLIB_CFLAGS="" |
| 637 |
SHLIB_LD="ld -shared -rdata_shared" |
| 638 |
SHLIB_LD_LIBS="" |
| 639 |
SHLIB_SUFFIX=".so" |
| 640 |
DL_OBJS="" |
| 641 |
DL_LIBS="" |
| 642 |
LD_FLAGS="" |
| 643 |
LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' |
| 644 |
;; |
| 645 |
*-linux*) |
| 646 |
SHLIB_CFLAGS="-fPIC" |
| 647 |
SHLIB_LD_LIBS="" |
| 648 |
SHLIB_SUFFIX=".so" |
| 649 |
if test "$have_dl" = yes; then |
| 650 |
SHLIB_LD="${CC} -shared" |
| 651 |
DL_OBJS="" |
| 652 |
DL_LIBS="-ldl" |
| 653 |
LD_FLAGS="-rdynamic" |
| 654 |
LD_SEARCH_FLAGS="" |
| 655 |
else |
| 656 |
AC_CHECK_HEADER(dld.h, [ |
| 657 |
SHLIB_LD="ld -shared" |
| 658 |
DL_OBJS="" |
| 659 |
DL_LIBS="-ldld" |
| 660 |
LD_FLAGS="" |
| 661 |
LD_SEARCH_FLAGS=""]) |
| 662 |
fi |
| 663 |
;; |
| 664 |
MP-RAS-02*) |
| 665 |
SHLIB_CFLAGS="-K PIC" |
| 666 |
SHLIB_LD="cc -G" |
| 667 |
SHLIB_LD_LIBS="" |
| 668 |
SHLIB_SUFFIX=".so" |
| 669 |
DL_OBJS="" |
| 670 |
DL_LIBS="-ldl" |
| 671 |
LD_FLAGS="" |
| 672 |
LD_SEARCH_FLAGS="" |
| 673 |
;; |
| 674 |
MP-RAS-*) |
| 675 |
SHLIB_CFLAGS="-K PIC" |
| 676 |
SHLIB_LD="cc -G" |
| 677 |
SHLIB_LD_LIBS="" |
| 678 |
SHLIB_SUFFIX=".so" |
| 679 |
DL_OBJS="" |
| 680 |
DL_LIBS="-ldl" |
| 681 |
LD_FLAGS="-Wl,-Bexport" |
| 682 |
LD_SEARCH_FLAGS="" |
| 683 |
;; |
| 684 |
*-netbsd*|*-freebsd*|*-openbsd*) |
| 685 |
# Not available on all versions: check for include file. |
| 686 |
AC_CHECK_HEADER(dlfcn.h, [ |
| 687 |
SHLIB_CFLAGS="-fpic" |
| 688 |
SHLIB_LD="ld -Bshareable -x" |
| 689 |
SHLIB_LD_LIBS="" |
| 690 |
SHLIB_SUFFIX=".so" |
| 691 |
DL_OBJS="" |
| 692 |
DL_LIBS="" |
| 693 |
LD_FLAGS="" |
| 694 |
LD_SEARCH_FLAGS="" |
| 695 |
ASC_SHARED_LIB_SUFFIX='`echo ${VERSION} | tr -d .`.so.1.0' |
| 696 |
], [ |
| 697 |
SHLIB_CFLAGS="" |
| 698 |
SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r" |
| 699 |
SHLIB_LD_LIBS='${LIBS}' |
| 700 |
SHLIB_SUFFIX=".a" |
| 701 |
DL_OBJS="" |
| 702 |
DL_LIBS="" |
| 703 |
LD_FLAGS="" |
| 704 |
LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' |
| 705 |
ASC_SHARED_LIB_SUFFIX='`echo ${VERSION} | tr -d .`.a' |
| 706 |
]) |
| 707 |
|
| 708 |
# FreeBSD doesn't handle version numbers with dots. |
| 709 |
|
| 710 |
ASC_UNSHARED_LIB_SUFFIX='`echo ${VERSION} | tr -d .`.a' |
| 711 |
ASC_LIB_VERSIONS_OK=nodots |
| 712 |
;; |
| 713 |
*-nextstep*) |
| 714 |
SHLIB_CFLAGS="" |
| 715 |
SHLIB_LD="cc -nostdlib -r" |
| 716 |
SHLIB_LD_LIBS="" |
| 717 |
SHLIB_SUFFIX=".so" |
| 718 |
DL_OBJS="" |
| 719 |
DL_LIBS="" |
| 720 |
LD_FLAGS="" |
| 721 |
LD_SEARCH_FLAGS="" |
| 722 |
;; |
| 723 |
alpha-dec-osf*) |
| 724 |
# Digital OSF/1 |
| 725 |
SHLIB_CFLAGS="" |
| 726 |
SHLIB_LD='ld -shared -expect_unresolved "*"' |
| 727 |
SHLIB_LD_LIBS="" |
| 728 |
SHLIB_SUFFIX=".so" |
| 729 |
DL_OBJS="" |
| 730 |
DL_LIBS="" |
| 731 |
LD_FLAGS="" |
| 732 |
LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' |
| 733 |
;; |
| 734 |
*-riscos*) |
| 735 |
SHLIB_CFLAGS="-G 0" |
| 736 |
SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" |
| 737 |
SHLIB_LD_LIBS='${LIBS}' |
| 738 |
SHLIB_SUFFIX=".a" |
| 739 |
DL_OBJS="" |
| 740 |
DL_LIBS="" |
| 741 |
LD_FLAGS="-Wl,-D,08000000" |
| 742 |
LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' |
| 743 |
;; |
| 744 |
SCO_SV-3.2*) |
| 745 |
# Note, dlopen is available only on SCO 3.2.5 and greater. However, |
| 746 |
# this test works, since "uname -s" was non-standard in 3.2.4 and |
| 747 |
# below. |
| 748 |
SHLIB_CFLAGS="-Kpic -belf" |
| 749 |
SHLIB_LD="ld -G" |
| 750 |
SHLIB_LD_LIBS="" |
| 751 |
SHLIB_SUFFIX=".so" |
| 752 |
DL_OBJS="" |
| 753 |
DL_LIBS="" |
| 754 |
LD_FLAGS="-belf -Wl,-Bexport" |
| 755 |
LD_SEARCH_FLAGS="" |
| 756 |
;; |
| 757 |
*-sni-sysv*) |
| 758 |
SHLIB_CFLAGS="-K PIC" |
| 759 |
SHLIB_LD="cc -G" |
| 760 |
SHLIB_LD_LIBS="" |
| 761 |
SHLIB_SUFFIX=".so" |
| 762 |
DL_OBJS="" |
| 763 |
DL_LIBS="-ldl" |
| 764 |
LD_FLAGS="" |
| 765 |
LD_SEARCH_FLAGS="" |
| 766 |
;; |
| 767 |
*-sunos4*) |
| 768 |
SHLIB_CFLAGS="-PIC" |
| 769 |
SHLIB_LD="ld" |
| 770 |
SHLIB_LD_LIBS="" |
| 771 |
SHLIB_SUFFIX=".so" |
| 772 |
DL_OBJS="" |
| 773 |
DL_LIBS="-ldl" |
| 774 |
LD_FLAGS="" |
| 775 |
LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' |
| 776 |
|
| 777 |
# SunOS can't handle version numbers with dots in them in library |
| 778 |
# specs, like -ltcl7.5, so use -ltcl75 instead. Also, it |
| 779 |
# requires an extra version number at the end of .so file names. |
| 780 |
# So, the library has to have a name like libtcl75.so.1.0 |
| 781 |
|
| 782 |
ASC_SHARED_LIB_SUFFIX='`echo ${VERSION} | tr -d .`.so.1.0' |
| 783 |
ASC_UNSHARED_LIB_SUFFIX='`echo ${VERSION} | tr -d .`.a' |
| 784 |
ASC_LIB_VERSIONS_OK=nodots |
| 785 |
;; |
| 786 |
*-solaris*) |
| 787 |
SHLIB_CFLAGS="-KPIC" |
| 788 |
SHLIB_LD="/usr/ccs/bin/ld -G -z text" |
| 789 |
|
| 790 |
# Note: need the LIBS below, otherwise Tk won't find ASCEND's |
| 791 |
# symbols when dynamically loaded into tclsh. |
| 792 |
|
| 793 |
SHLIB_LD_LIBS='${LIBS}' |
| 794 |
SHLIB_SUFFIX=".so" |
| 795 |
DL_OBJS="" |
| 796 |
DL_LIBS="-ldl" |
| 797 |
LD_FLAGS="" |
| 798 |
LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' |
| 799 |
;; |
| 800 |
*-ultrix4*) |
| 801 |
SHLIB_CFLAGS="-G 0" |
| 802 |
SHLIB_SUFFIX=".a" |
| 803 |
SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" |
| 804 |
SHLIB_LD_LIBS='${LIBS}' |
| 805 |
DL_OBJS="" |
| 806 |
DL_LIBS="" |
| 807 |
LD_FLAGS="-Wl,-D,08000000" |
| 808 |
LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' |
| 809 |
;; |
| 810 |
mips-dde-sysv*) |
| 811 |
SHLIB_CFLAGS="-KPIC" |
| 812 |
SHLIB_LD="cc -G" |
| 813 |
SHLIB_LD_LIBS="" |
| 814 |
SHLIB_SUFFIX=".so" |
| 815 |
DL_OBJS="" |
| 816 |
DL_LIBS="-ldl" |
| 817 |
# Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers |
| 818 |
# that don't grok the -Bexport option. Test that it does. |
| 819 |
hold_ldflags=$LDFLAGS |
| 820 |
AC_MSG_CHECKING([for ld accepts -Bexport flag]) |
| 821 |
LDFLAGS="${LDFLAGS} -Wl,-Bexport" |
| 822 |
AC_TRY_LINK(, [int i;], found=yes, found=no) |
| 823 |
LDFLAGS=$hold_ldflags |
| 824 |
AC_MSG_RESULT($found) |
| 825 |
if test "$found" = yes; then |
| 826 |
LD_FLAGS="-Wl,-Bexport" |
| 827 |
else |
| 828 |
LD_FLAGS="" |
| 829 |
fi |
| 830 |
LD_SEARCH_FLAGS="" |
| 831 |
;; |
| 832 |
esac |
| 833 |
|
| 834 |
#-------------------------------------------------------------------- |
| 835 |
# TCL / TK / TK-TABLE |
| 836 |
# |
| 837 |
# The user can specify the location of the Tcl and/or Tk |
| 838 |
# libraries using the --with-tcl and --with-tk configure |
| 839 |
# options. Print a warning if the user tries to say |
| 840 |
# --without-tcl since ASCEND requires Tcl/Tk. |
| 841 |
# |
| 842 |
# If the user does not specify the location, we need to search |
| 843 |
# for either shared or static versions of the Tcl and Tk |
| 844 |
# libraries, and they must be for version 8.x of Tcl/Tk. |
| 845 |
# |
| 846 |
# Check for the static Tcl library in a list of reasonable |
| 847 |
# locations. If we find it, verify that it is from Tcl 8.0 by |
| 848 |
# looking for the symbol `TclCompileCatchCmd'. Remember, we |
| 849 |
# need the math library and the dynamic loader library (-ldl or |
| 850 |
# -ldld) to avoid undefined symbols when we test the version of |
| 851 |
# the Tcl library. |
| 852 |
# |
| 853 |
# If we can't find a static Tcl8.0 library, try to find a |
| 854 |
# dynamic one by calling AC_CHECK_LIB and looking for the |
| 855 |
# function `TclCompileCatchCmd'. If we fail, print an error |
| 856 |
# message and exit configure. |
| 857 |
# |
| 858 |
# Search for a version of tcl.h that contains `8.' in the |
| 859 |
# TCL_MAJOR_VERSION macro; we look in a list of reasonable |
| 860 |
# locations, then call AC_EGREP_HEADER to look for us. |
| 861 |
# |
| 862 |
# Repeat the process for the Tk library; the symbol we want is |
| 863 |
# `Tk_NameOfFont'; remember we need the X library---and all the |
| 864 |
# libraries it needs---as well as the Tcl library to avoid |
| 865 |
# undefined symbols when we test the version of the Tk library. |
| 866 |
# |
| 867 |
# The user can use --with-tktable to specify a location for a |
| 868 |
# static version of the Tk-Table library. If a value is |
| 869 |
# specified, assume it is good and define the cpp macro |
| 870 |
# STATIC_TABLE. |
| 871 |
# |
| 872 |
# If a value is not specified, look for libTktable.a; if we |
| 873 |
# find it, assume it works and define the cpp macro |
| 874 |
# STATIC_TABLE. If we don't find it, assume ASCEND will be |
| 875 |
# able to dynamically load it at run time and tell the user |
| 876 |
# about our assumption. |
| 877 |
#-------------------------------------------------------------------- |
| 878 |
# |
| 879 |
# a list of directories to search for the Tcl/Tk libraries |
| 880 |
asc_tcl_library_dirs=" |
| 881 |
/usr/local/lib/ascend/lib |
| 882 |
$prefix/lib:$exec_prefix/lib |
| 883 |
$ascpwd/tcl8.0 |
| 884 |
$ascpwd/tcl8.0/unix |
| 885 |
$ascpwd/tk8.0 |
| 886 |
$ascpwd/tk8.0/unix |
| 887 |
$ascpwd/ascend4/lib |
| 888 |
/lib |
| 889 |
/usr/lib |
| 890 |
/usr/local/lib |
| 891 |
/usr/contributed/lib |
| 892 |
/afs/cs/project/ascend/depot/@sys/lib |
| 893 |
" |
| 894 |
# a list of directories to search for the Tcl/Tk include files |
| 895 |
asc_tcl_include_dirs=" |
| 896 |
/usr/local/lib/ascend/include |
| 897 |
$prefix/include |
| 898 |
$fullpathsrcdir/tcl8.0 |
| 899 |
$fullpathsrcdir/tcl8.0/generic |
| 900 |
$fullpathsrcdir/tk8.0 |
| 901 |
$fullpathsrcdir/tk8.0/generic |
| 902 |
$fullpathsrcdir/ascend4/include |
| 903 |
$ascpwd/ascend4/include |
| 904 |
/usr/include |
| 905 |
/usr/local/include |
| 906 |
/usr/contributed/include |
| 907 |
/afs/cs/project/ascend/depot/common/include |
| 908 |
" |
| 909 |
# a list of directories to search for the TkTable library |
| 910 |
asc_tk_table_dirs=" |
| 911 |
/usr/local/lib/ascend/lib/Tktable |
| 912 |
$prefix/lib/Tktable |
| 913 |
$exec_prefix/lib/Tktable |
| 914 |
$ascpwd/tkTable1.80 |
| 915 |
$ascpwd/ascend4/lib |
| 916 |
$ascpwd/ascend4/lib/Tktable |
| 917 |
/afs/cs/project/ascend/depot/@sys/lib/Tktable |
| 918 |
" |
| 919 |
# see if the user gave us the location of the Tcl8.0 |
| 920 |
# library and/or header file |
| 921 |
# |
| 922 |
AC_ARG_WITH(tcl, |
| 923 |
[Location of Tcl, Tk, and tkTable: |
| 924 |
--with-tcl=LIBRARY,HEADER |
| 925 |
The location of the Tcl8.0 library and/or header |
| 926 |
For a static Tcl8.0 library, give the full path: |
| 927 |
--with-tcl='/usr/local/lib/libtcl8.0.a' |
| 928 |
For a dynamic library, give any -L options required: |
| 929 |
--with-tcl='-L/usr/local/lib -ltcl8.0' |
| 930 |
To specify only the header, leave off the library: |
| 931 |
--with-tcl=',/usr/local/include/tcl.h'] , |
| 932 |
, [with_tcl=yes]) |
| 933 |
|
| 934 |
case "$with_tcl" in |
| 935 |
no) |
| 936 |
# User specified --without-tcl; this makes no sense, |
| 937 |
# print a warning and search for it ourselves |
| 938 |
AC_MSG_WARN([Bad option '--without-tcl' |
| 939 |
ASCEND must be compiled with Tcl8.0.]) |
| 940 |
with_tcllib=_searching |
| 941 |
with_tclhdr=_searching |
| 942 |
;; |
| 943 |
yes|,|"") |
| 944 |
# User didn't give the option or didn't give useful |
| 945 |
# information, search for it ourselves |
| 946 |
with_tcllib=_searching |
| 947 |
with_tclhdr=_searching |
| 948 |
;; |
| 949 |
,*) |
| 950 |
# Only the header was specified. |
| 951 |
with_tcllib=_searching |
| 952 |
TCL_HDR=`echo $with_tcl | sed 's/^,//'` |
| 953 |
;; |
| 954 |
*,?*) |
| 955 |
# Both the library and the header were specified |
| 956 |
TCL_LIB=`echo $with_tcl | sed 's/,.*$//'` |
| 957 |
TCL_HDR=`echo $with_tcl | sed 's/^.*,//'` |
| 958 |
;; |
| 959 |
*) |
| 960 |
# Only the library was specified |
| 961 |
TCL_LIB=`echo $with_tcl | sed 's/,$//'` |
| 962 |
with_tclhdr=_searching |
| 963 |
;; |
| 964 |
esac |
| 965 |
|
| 966 |
# try to find a static version of the Tcl8.0 library |
| 967 |
# |
| 968 |
if test "X$with_tcllib" = X_searching ; then |
| 969 |
AC_PATH_PROGS(TCL_LIB, libtcl8.0.a libtcl80.a libtcl8.3.a, , $asc_tcl_library_dirs) |
| 970 |
if test -z "$TCL_LIB" ; then |
| 971 |
TCL_LIB=_searching |
| 972 |
fi |
| 973 |
else |
| 974 |
AC_MSG_RESULT([checking for tcl library... $TCL_LIB]) |
| 975 |
fi |
| 976 |
|
| 977 |
# verify the TCL_LIB |
| 978 |
if test ! "X$TCL_LIB" = X_searching ; then |
| 979 |
AC_MSG_CHECKING([whether $TCL_LIB is for Tcl8.3]) |
| 980 |
asc_libs_orig=$LIBS |
| 981 |
LIBS="$TCL_LIB $X11_LIBRARIES $X11_EXTRA_LIBS $DL_LIBS $MATH_LIBS $LIBS" |
| 982 |
AC_TRY_LINK( , [TclCompileCatchCmd()], , [TCL_LIB=_searching]); |
| 983 |
if test "X$TCL_LIB" = X_searching ; then |
| 984 |
AC_MSG_RESULT(no) |
| 985 |
else |
| 986 |
AC_MSG_RESULT(yes) |
| 987 |
fi |
| 988 |
LIBS=$asc_libs_orig |
| 989 |
fi |
| 990 |
|
| 991 |
# see if the default LPATH can find the Tcl8.0 library |
| 992 |
# |
| 993 |
if test "X$TCL_LIB" = X_searching ; then |
| 994 |
AC_CHECK_LIB(tcl83, TclCompileCatchCmd, [TCL_LIB="-ltcl83"] , , |
| 995 |
[$X11_LIBRARIES $X11_EXTRA_LIBS $DL_LIBS $MATH_LIBS]) |
| 996 |
fi |
| 997 |
if test "X$TCL_LIB" = X_searching ; then |
| 998 |
AC_CHECK_LIB(tcl8.3, TclCompileCatchCmd, [TCL_LIB="-ltcl8.3"] , , |
| 999 |
[$X11_LIBRARIES $X11_EXTRA_LIBS $DL_LIBS $MATH_LIBS]) |
| 1000 |
fi |
| 1001 |
if test "X$TCL_LIB" = X_searching ; then |
| 1002 |
AC_CHECK_LIB(tcl8.0, TclCompileCatchCmd, [TCL_LIB="-ltcl8.0"] , , |
| 1003 |
[$X11_LIBRARIES $X11_EXTRA_LIBS $DL_LIBS $MATH_LIBS]) |
| 1004 |
fi |
| 1005 |
if test "X$TCL_LIB" = X_searching ; then |
| 1006 |
AC_CHECK_LIB(tcl80, TclCompileCatchCmd, [TCL_LIB="-ltcl80"] , , |
| 1007 |
[$X11_LIBRARIES $X11_EXTRA_LIBS $DL_LIBS $MATH_LIBS]) |
| 1008 |
fi |
| 1009 |
if test "X$TCL_LIB" = X_searching ; then |
| 1010 |
AC_CHECK_LIB(tcl, TclCompileCatchCmd, [TCL_LIB="-ltcl"] , , |
| 1011 |
[$X11_LIBRARIES $X11_EXTRA_LIBS $DL_LIBS $MATH_LIBS]) |
| 1012 |
fi |
| 1013 |
|
| 1014 |
# give up searching for the Tcl8.0 library |
| 1015 |
# |
| 1016 |
if test "X$TCL_LIB" = X_searching ; then |
| 1017 |
AC_MSG_ERROR([Cannot find a compatiable Tcl library. |
| 1018 |
You must build and install Tcl version 8.3 before you |
| 1019 |
can build ASCEND. If you have installed the correct version |
| 1020 |
of Tcl, run configure again with the argument: |
| 1021 |
--with-tcl=LIBRARY,HEADER |
| 1022 |
where LIBRARY and HEADER are the full paths to the Tcl8.3 |
| 1023 |
library file and header file, respectively.]) |
| 1024 |
fi |
| 1025 |
|
| 1026 |
# see if the user gave us the location of the Tcl8.0 header file |
| 1027 |
# |
| 1028 |
if test ! "X$with_tclhdr" = X_searching ; then |
| 1029 |
if test ! -f "$TCL_HDR" ; then |
| 1030 |
AC_MSG_WARN([user specified Tcl header file, $TCL_HDR, does not exist]) |
| 1031 |
with_tclhdr=_searching |
| 1032 |
TCL_HDR='' |
| 1033 |
fi |
| 1034 |
fi |
| 1035 |
if test "X$with_tclhdr" = X_searching ; then |
| 1036 |
AC_PATH_PROG(TCL_HDR, tcl.h, , $asc_tcl_include_dirs) |
| 1037 |
if test -z "$TCL_HDR" ; then |
| 1038 |
AC_EGREP_HEADER([TCL_MAJOR_VERSION.*8], tcl.h, [TCL_HDR='tcl.h'], ) |
| 1039 |
fi |
| 1040 |
else |
| 1041 |
AC_MSG_RESULT([checking for tcl header... $TCL_HDR]) |
| 1042 |
fi |
| 1043 |
if test -f "$TCL_HDR" ; then |
| 1044 |
AC_MSG_CHECKING([whether $TCL_HDR is for version 8]) |
| 1045 |
echo 'grep TCL_MAJOR_VERSION "$TCL_HDR" 2>&5' 1>&5 |
| 1046 |
grep_tcl_h=`grep TCL_MAJOR_VERSION "$TCL_HDR" 2>&5` |
| 1047 |
echo $grep_tcl_h 1>&5 |
| 1048 |
case "$grep_tcl_h" in |
| 1049 |
*8) |
| 1050 |
AC_MSG_RESULT(yes) |
| 1051 |
;; |
| 1052 |
*) |
| 1053 |
AC_MSG_RESULT(no) |
| 1054 |
TCL_HDR= |
| 1055 |
;; |
| 1056 |
esac |
| 1057 |
fi |
| 1058 |
if test -z "$TCL_HDR" ; then |
| 1059 |
AC_MSG_ERROR([Cannot find a compatiable Tcl header file. |
| 1060 |
You must build and install Tcl version 8.3 (but not yet 8.4) before you |
| 1061 |
can build ASCEND. If you have installed the correct version |
| 1062 |
of Tcl, run configure again with the argument: |
| 1063 |
--with-tcl=LIBRARY,HEADER |
| 1064 |
where LIBRARY and HEADER are the full paths to the Tcl8.3 |
| 1065 |
library file and header file, respectively.]) |
| 1066 |
fi |
| 1067 |
TCL_HDR=`echo $TCL_HDR | sed 's,tcl\.h$,,'` |
| 1068 |
if test -n "$TCL_HDR" ; then |
| 1069 |
TCL_HDR="-I$TCL_HDR" |
| 1070 |
fi |
| 1071 |
|
| 1072 |
|
| 1073 |
###### REPEAT FOR TK |
| 1074 |
# |
| 1075 |
# see if the user gave us the location of the Tk8.3 |
| 1076 |
# library and/or header file |
| 1077 |
# |
| 1078 |
AC_ARG_WITH(tk, |
| 1079 |
[ --with-tk=LIBRARY,HEADER |
| 1080 |
The location of the Tk8.0 library and/or header |
| 1081 |
For a static Tk8.0 library, give the full path: |
| 1082 |
--with-tk='/usr/local/lib/libtk8.3.a' |
| 1083 |
For a dynamic library, give any -L options required: |
| 1084 |
--with-tk='-L/usr/local/lib -ltk8.3' |
| 1085 |
To specify only the header, leave off the library: |
| 1086 |
--with-tk=',/usr/local/include/tk.h'] , |
| 1087 |
, [with_tk=yes]) |
| 1088 |
|
| 1089 |
case "$with_tk" in |
| 1090 |
no) |
| 1091 |
# User specified --without-tk; this makes no sense, |
| 1092 |
# print a warning and search for it ourselves |
| 1093 |
AC_MSG_WARN([Bad option '--without-tk' |
| 1094 |
ASCEND must be compiled with Tk8.0.]) |
| 1095 |
with_tklib=_searching |
| 1096 |
with_tkhdr=_searching |
| 1097 |
;; |
| 1098 |
yes|,|"") |
| 1099 |
# User didn't give the option or didn't give useful |
| 1100 |
# information, search for it ourselves |
| 1101 |
with_tklib=_searching |
| 1102 |
with_tkhdr=_searching |
| 1103 |
;; |
| 1104 |
,*) |
| 1105 |
# Only the header was specified. |
| 1106 |
with_tklib=_searching |
| 1107 |
TK_HDR=`echo $with_tk | sed 's/^,//'` |
| 1108 |
;; |
| 1109 |
*,?*) |
| 1110 |
# Both the library and the header were specified |
| 1111 |
TK_LIB=`echo $with_tk | sed 's/,.*$//'` |
| 1112 |
TK_HDR=`echo $with_tk | sed 's/^.*,//'` |
| 1113 |
;; |
| 1114 |
*) |
| 1115 |
# Only the library was specified |
| 1116 |
TK_LIB=`echo $with_tk | sed 's/,$//'` |
| 1117 |
with_tkhdr=_searching |
| 1118 |
;; |
| 1119 |
esac |
| 1120 |
|
| 1121 |
# try to find a static version of the Tk8.0 library |
| 1122 |
# |
| 1123 |
if test "X$with_tklib" = X_searching ; then |
| 1124 |
AC_PATH_PROGS(TK_LIB, libtk8.0.a libtk80.a libtk.a libtk8.3.a, , $asc_tcl_library_dirs) |
| 1125 |
if test -z "TK_LIB" ; then |
| 1126 |
TK_LIB=_searching |
| 1127 |
fi |
| 1128 |
else |
| 1129 |
AC_MSG_RESULT([checking for tk library... $TK_LIB]) |
| 1130 |
fi |
| 1131 |
|
| 1132 |
# verify the TK_LIB |
| 1133 |
# |
| 1134 |
if test ! "X$TK_LIB" = X_searching ; then |
| 1135 |
AC_MSG_CHECKING([whether $TK_LIB is for Tk8.0]) |
| 1136 |
asc_libs_orig=$LIBS |
| 1137 |
LIBS="$TK_LIB $TCL_LIB $X11_LIBRARIES -lX11 $X11_EXTRA_LIBS $DL_LIBS $MATH_LIBS $LIBS" |
| 1138 |
AC_TRY_LINK( , [Tk_NameOfFont()], , [TK_LIB=_searching]); |
| 1139 |
if test "X$TK_LIB" = X_searching ; then |
| 1140 |
AC_MSG_RESULT(no) |
| 1141 |
else |
| 1142 |
AC_MSG_RESULT(yes) |
| 1143 |
fi |
| 1144 |
LIBS=$asc_libs_orig |
| 1145 |
fi |
| 1146 |
|
| 1147 |
# see if the default LPATH can find the Tk8.0 library |
| 1148 |
# |
| 1149 |
if test "X$TK_LIB" = X_searching ; then |
| 1150 |
AC_MSG_RESULT([checking for a dynamically loaded Tk8.0 library]) |
| 1151 |
AC_CHECK_LIB(tk8.0, Tk_NameOfFont, [TK_LIB="-ltk8.0"] , , |
| 1152 |
[$TCL_LIB $X11_LIBRARIES -lX11 $X11_EXTRA_LIBS $DL_LIBS $MATH_LIBS]) |
| 1153 |
fi |
| 1154 |
if test "X$TK_LIB" = X_searching ; then |
| 1155 |
AC_CHECK_LIB(tk80, Tk_NameOfFont, [TK_LIB="-ltk80"] , , |
| 1156 |
[$TCL_LIB $X11_LIBRARIES -lX11 $X11_EXTRA_LIBS $DL_LIBS $MATH_LIBS]) |
| 1157 |
fi |
| 1158 |
if test "X$TK_LIB" = X_searching ; then |
| 1159 |
AC_CHECK_LIB(tk, Tk_NameOfFont, [TK_LIB="-ltk"] , , |
| 1160 |
[$TCL_LIB $X11_LIBRARIES -lX11 $X11_EXTRA_LIBS $DL_LIBS $MATH_LIBS]) |
| 1161 |
fi |
| 1162 |
|
| 1163 |
# give up searching for the Tk8.0 library |
| 1164 |
# |
| 1165 |
if test "X$TK_LIB" = X_searching ; then |
| 1166 |
AC_MSG_ERROR([Cannot find a compatiable Tk library. |
| 1167 |
You must build and install Tk version 8.0 or newer before you |
| 1168 |
can build ASCEND. If you have installed the correct version |
| 1169 |
of Tk, run configure again with the argument: |
| 1170 |
--with-tk=LIBRARY,HEADER |
| 1171 |
where LIBRARY and HEADER are the full paths to the Tk8.0 |
| 1172 |
library file and header file, respectively.]) |
| 1173 |
fi |
| 1174 |
|
| 1175 |
# see if the user gave us the location of the Tk8.0 header file |
| 1176 |
# |
| 1177 |
if test ! "X$with_tkhdr" = X_searching ; then |
| 1178 |
if test ! -f "$TK_HDR" ; then |
| 1179 |
AC_MSG_WARN([user specified Tk header file, $TK_HDR, does not exist]) |
| 1180 |
with_tkhdr=_searching |
| 1181 |
TK_HDR='' |
| 1182 |
fi |
| 1183 |
fi |
| 1184 |
if test "X$with_tkhdr" = X_searching ; then |
| 1185 |
AC_PATH_PROG(TK_HDR, tk.h, , $asc_tcl_include_dirs) |
| 1186 |
if test -z "$TK_HDR" ; then |
| 1187 |
AC_EGREP_HEADER([TK_MAJOR_VERSION.*8], tk.h, [TK_HDR='tk.h'], ) |
| 1188 |
fi |
| 1189 |
else |
| 1190 |
AC_MSG_RESULT([checking for tk header... $TK_HDR]) |
| 1191 |
fi |
| 1192 |
if test -f "$TK_HDR" ; then |
| 1193 |
AC_MSG_CHECKING([whether $TK_HDR is for version 8]) |
| 1194 |
echo 'grep TK_MAJOR_VERSION "$TK_HDR" 2>&5' 1>&5 |
| 1195 |
grep_tk_h=`grep TK_MAJOR_VERSION "$TK_HDR" 2>&5` |
| 1196 |
echo $grep_tk_h 1>&5 |
| 1197 |
case "$grep_tk_h" in |
| 1198 |
*8) |
| 1199 |
AC_MSG_RESULT(yes) |
| 1200 |
;; |
| 1201 |
*) |
| 1202 |
AC_MSG_RESULT(no) |
| 1203 |
TK_HDR= |
| 1204 |
;; |
| 1205 |
esac |
| 1206 |
fi |
| 1207 |
if test -z "$TK_HDR" ; then |
| 1208 |
AC_MSG_ERROR([Cannot find a compatiable Tk header file. |
| 1209 |
You must build and install Tk version 8.0 or newer before you |
| 1210 |
can build ASCEND. If you have installed the correct version |
| 1211 |
of Tk, run configure again with the argument: |
| 1212 |
--with-tk=LIBRARY,HEADER |
| 1213 |
where LIBRARY and HEADER are the full paths to the Tk8.0 |
| 1214 |
library file and header file, respectively.]) |
| 1215 |
fi |
| 1216 |
TK_HDR=`echo $TK_HDR | sed 's,tk\.h$,,'` |
| 1217 |
if test -n "$TK_HDR" ; then |
| 1218 |
TK_HDR="-I$TK_HDR" |
| 1219 |
if test "X$TCL_HDR" = "X$TK_HDR" ; then |
| 1220 |
TK_HDR= |
| 1221 |
fi |
| 1222 |
fi |
| 1223 |
|
| 1224 |
|
| 1225 |
AC_ARG_WITH(tktable, |
| 1226 |
[ --with-tktable=TKTABLE full path to a TkTable1.3 static library], , ) |
| 1227 |
case "$with_tktable" in |
| 1228 |
yes|no|"") |
| 1229 |
# search for the table |
| 1230 |
AC_PATH_PROG(TKTABLE_LIB, libTktable.a, , $asc_tk_table_dirs) |
| 1231 |
;; |
| 1232 |
*) |
| 1233 |
# use the user's value |
| 1234 |
TKTABLE_LIB="$with_tktable" |
| 1235 |
;; |
| 1236 |
esac |
| 1237 |
if test -n "$TKTABLE_LIB" ; then |
| 1238 |
HAVE_TKTABLE='-DSTATIC_TKTABLE' |
| 1239 |
else |
| 1240 |
AC_MSG_RESULT(Assuming Tktable will be dynamically linked into ASCEND) |
| 1241 |
fi |
| 1242 |
|
| 1243 |
AC_ARG_WITH(wish, |
| 1244 |
[ --with-wish=/path/to/bin/wish |
| 1245 |
The location of the wish shell executable matching |
| 1246 |
the tcl/tk given by --with-tk and --with-tcl. |
| 1247 |
X11 must be running during configure. ] , |
| 1248 |
, [with_wish=no]) |
| 1249 |
case "$with_wish" in |
| 1250 |
yes|no|"") |
| 1251 |
AC_MSG_RESULT([--with-wish not specified. |
| 1252 |
Setting env vars TCL_LIBRARY, TK_LIBRARY may be needed to run.]) |
| 1253 |
;; |
| 1254 |
*) |
| 1255 |
AC_MSG_CHECKING([wish for tcl_library,tklibrary]) |
| 1256 |
ASC_TK_LIBRARY=`config/wishvar tk_library $with_wish` |
| 1257 |
ASC_TCL_LIBRARY=`config/wishvar tcl_library $with_wish` |
| 1258 |
AC_MSG_RESULT([ $ASC_TCL_LIBRARY , $ASC_TK_LIBRARY]) |
| 1259 |
;; |
| 1260 |
esac |
| 1261 |
|
| 1262 |
|
| 1263 |
#-------------------------------------------------------------------- |
| 1264 |
# FORTRAN |
| 1265 |
# |
| 1266 |
# ASCEND uses the LSOD integrator and is capable of working |
| 1267 |
# with CONOPT and with MINOS. These libraries are written in |
| 1268 |
# Fortran; to use them, configure needs to find a Fortran |
| 1269 |
# compiler and the necessary Fortran libraries (e.g., |
| 1270 |
# libF77.a). LSOD, CONOPT, and MINOS also require the BLAS and |
| 1271 |
# LINPACK libraries to avoid undefined symbols at link time. |
| 1272 |
# |
| 1273 |
# The builder can specify the location of |
| 1274 |
# * the Fortran compiler and libraries using |
| 1275 |
# --with-fortran=<compiler>,<libraries> |
| 1276 |
# * the BLAS library using |
| 1277 |
# --with-blas=<blas-library> |
| 1278 |
# * the LINPACK library using |
| 1279 |
# --with-linpack=<linpack-library> |
| 1280 |
# * the LSOD library using |
| 1281 |
# --with-blas=<lsod-library> |
| 1282 |
# * the CONOPT library using |
| 1283 |
# --with-conopt=<conopt-library> |
| 1284 |
# * the MINOS library using |
| 1285 |
# --with-minos=<minos-library> <===currently disabled |
| 1286 |
# The builder can disable some parts of the fortran build using |
| 1287 |
# the --without-<package> configure option. |
| 1288 |
# |
| 1289 |
# If the user does not specify the locations of the compiler |
| 1290 |
# and the libraries and does not disable them, configure |
| 1291 |
# attempts to find them. |
| 1292 |
# |
| 1293 |
# Building with LSOD, CONOPT, and/or MINOS is further |
| 1294 |
# complicated by the dependencies between these libraries and |
| 1295 |
# the BLAS and LINPACK libraries. |
| 1296 |
# |
| 1297 |
# If we cannot find a Fortran compiler, we disable all Fortran |
| 1298 |
# code (LSOD, CONOPT, and MINOS). Otherwise, look for the |
| 1299 |
# Fortran libraries (e.g., libF77.a) based on the type of |
| 1300 |
# machine we are compiling on. |
| 1301 |
# |
| 1302 |
# If Fortran is enabled, we need to find a compiled BLAS |
| 1303 |
# library or source code. Check for the machine's libblas.a |
| 1304 |
# and ASCEND's libascblas.a; if those fail, check for the |
| 1305 |
# libascblas.a source code; if that fails, we disable all |
| 1306 |
# Fortran (LSOD, CONOPT, MINOS). |
| 1307 |
# |
| 1308 |
# If Fortran is enabled, we need to find a compiled LINPACK |
| 1309 |
# library or source code. Check for the machine's liblpak.a |
| 1310 |
# and ASCEND's libasclpak.a; if those fail, check for the |
| 1311 |
# libasclpak.a source code; if that fails, we disable all |
| 1312 |
# Fortran (LSOD, CONOPT, MINOS). |
| 1313 |
# |
| 1314 |
# If Fortran is enabled, we try to find a compiled LSOD library |
| 1315 |
# or source code. Check for a libinteg.a; if that fails, check |
| 1316 |
# for the libinteg.a source code; if that fails, we disable |
| 1317 |
# LSOD. If we find LSOD, define STATIC_LSOD. |
| 1318 |
# |
| 1319 |
# If Fortran is enabled, we try to find a compiled OPTSQP |
| 1320 |
# library or source code. Check for a librsqp.a; if that fails, |
| 1321 |
# check for the librsqp.a source code; if that fails, we disable |
| 1322 |
# OPTSQP. If we find RSQP, define STATIC_OPTSQP. |
| 1323 |
# |
| 1324 |
# If Fortran is enabled, we try to find a compiled CONOPT |
| 1325 |
# library. Check for a libconsub.a; if that fails, we disable |
| 1326 |
# CONOPT. If we find CONOPT, define STATIC_CONOPT; if not, |
| 1327 |
# tell the user where to find CONOPT using the contact |
| 1328 |
# information from the nonlinear programming FAQ: |
| 1329 |
# http://www.mcs.anl.gov/home/otc/Guide/faq/nonlinear-programming-faq.html |
| 1330 |
# |
| 1331 |
# If Fortran is enabled, we try to find a compiled MINOS |
| 1332 |
# library or source code. Check for a libminos54.a; if that |
| 1333 |
# fails, check for the libminos54.a source code; if that fails, |
| 1334 |
# we disable MINOS. If we find MINOS, define STATIC_MINOS; if |
| 1335 |
# not, tell the user where to find MINOS using the contact |
| 1336 |
# information from the nonlinear programming FAQ: |
| 1337 |
# http://www.mcs.anl.gov/home/otc/Guide/faq/nonlinear-programming-faq.html |
| 1338 |
#-------------------------------------------------------------------- |
| 1339 |
# |
| 1340 |
# the list of directories to search for the fortran compiler |
| 1341 |
asc_f77_prog_dirs="$PATH:/usr/lang:/opt/SUNWspro/bin" |
| 1342 |
# |
| 1343 |
# the list of directories to search for the required fortran libraries |
| 1344 |
asc_f77_support_dirs=" |
| 1345 |
/lib |
| 1346 |
/usr/lib |
| 1347 |
/usr/local/lib |
| 1348 |
/usr/contributed/lib |
| 1349 |
/usr/local/lib/ascend/lib |
| 1350 |
$ascpwd/blas |
| 1351 |
$ascpwd/linpack |
| 1352 |
$ascpwd/lsod |
| 1353 |
|
| 1354 |
##AWW There are folders two levels up from configure for these packages |
| 1355 |
$fullpathsrcdir/../../blas |
| 1356 |
$fullpathsrcdir/../../linpack |
| 1357 |
$fullpathsrcdir/../../lsod |
| 1358 |
|
| 1359 |
#AWW20041113: $ascpwd/conopt |
| 1360 |
#AWW20041113: $ascpwd/rsqp |
| 1361 |
#AWW20041113: $ascpwd/minos |
| 1362 |
#AWW20041113: $ascpwd/ascend4/archive |
| 1363 |
$ascpwd/generic/archive |
| 1364 |
/afs/cs/project/ascend/depot/@sys/lib |
| 1365 |
/afs/cs/project/ascend/depot/build/obj/conopt |
| 1366 |
" |
| 1367 |
# |
| 1368 |
AC_ARG_WITH(fortran, |
| 1369 |
[Fortran compiler and libraries: |
| 1370 |
--with-fortran=F77,F77LIBS |
| 1371 |
The location of your Fortran compiler and its |
| 1372 |
library files. For example, under SunOS: |
| 1373 |
--with-fortran='f77,-L/usr/lang/lib -lF77 -lM77' |
| 1374 |
To specify only the compiler or libraries, leave off |
| 1375 |
whatever is not needed: |
| 1376 |
--with-fortran=',-L/usr/lang/lib -lF77 -lM77' |
| 1377 |
Use '--without-fortran' to not link against |
| 1378 |
any Fortran libraries], |
| 1379 |
, [with_fortran=yes]) |
| 1380 |
case "$with_fortran" in |
| 1381 |
no) |
| 1382 |
# The user disabled all fortran using |
| 1383 |
# the --without-fortran option. |
| 1384 |
F77= |
| 1385 |
F77LIBS= |
| 1386 |
with_f77=no |
| 1387 |
with_f77libs=no |
| 1388 |
;; |
| 1389 |
yes|,|"") |
| 1390 |
# The user didn't pass in the --with-fortran option |
| 1391 |
# or didn't give us any useful information. We do |
| 1392 |
# the search ourselves. |
| 1393 |
with_f77=_searching |
| 1394 |
with_f77libs=_searching |
| 1395 |
;; |
| 1396 |
,*) |
| 1397 |
# The user passed in the libraries, search for the |
| 1398 |
# compiler ourselves. |
| 1399 |
with_f77=_searching |
| 1400 |
F77LIBS=`echo $with_fortran | sed 's/^,//'` |
| 1401 |
echo "user gave F77LIBS=$F77LIBS" |
| 1402 |
;; |
| 1403 |
*,?*) |
| 1404 |
# The user passed in both the compiler and the |
| 1405 |
# libraries. |
| 1406 |
F77=`echo $with_fortran | sed s'/,.*$//'` |
| 1407 |
F77LIBS=`echo $with_fortran | sed 's/^.*,//'` |
| 1408 |
echo "user gave F77=$F77" |
| 1409 |
echo "user gave F77LIBS=$F77LIBS" |
| 1410 |
;; |
| 1411 |
*) |
| 1412 |
# The user passed in the compiler; search for the |
| 1413 |
# libraries ourselves. |
| 1414 |
F77=`echo $with_fortran | sed s'/,$//'` |
| 1415 |
with_f77libs=_searching |
| 1416 |
echo "user gave F77=$F77" |
| 1417 |
;; |
| 1418 |
esac |
| 1419 |
|
| 1420 |
if test "X$with_f77" = X_searching ; then |
| 1421 |
# Search for the fortran compiler; print a warning if we can't |
| 1422 |
# find it and disable all fortran. |
| 1423 |
AC_PATH_PROGS(F77, f77 xlf g77, , $asc_f77_prog_dirs) |
| 1424 |
if test -z "$F77" ; then |
| 1425 |
with_fortran=no |
| 1426 |
with_f77libs=no |
| 1427 |
AC_MSG_WARN([Cannot find your Fortran compiler. Building ASCEND |
| 1428 |
without integration, MINOS, and CONOPT support. To bulid ASCEND with |
| 1429 |
Fortran support, run configure with the option |
| 1430 |
--with-fortran=F77,F77LIBS |
| 1431 |
where F77 is the full path to your Fortran compiler and F77LIBS are |
| 1432 |
its related libraries]) |
| 1433 |
fi |
| 1434 |
fi |
| 1435 |
|
| 1436 |
if test "X$with_f77libs" = X_searching ; then |
| 1437 |
# We found a compiler, now search for the fortran libraries |
| 1438 |
# based on the system type. |
| 1439 |
AC_MSG_RESULT([checking for fortran libraries based on system type]) |
| 1440 |
case "$host" in |
| 1441 |
alpha-dec-osf*) |
| 1442 |
AC_CHECK_LIB(for, for_lle, [F77LIBS="$F77LIBS -lfor"], , $F77LIBS) |
| 1443 |
AC_CHECK_LIB(ots, _OtsFill, [F77LIBS="$F77LIBS -lots"], , $F77LIBS) |
| 1444 |
AC_CHECK_LIB(Ufor, etime_, [F77LIBS="$F77LIBS -lUfor"], , $F77LIBS) |
| 1445 |
;; |
| 1446 |
mips-dec-ultrix*) |
| 1447 |
AC_CHECK_LIB(for, for_lle, [F77LIBS="$F77LIBS -lfor"], , $F77LIBS) |
| 1448 |
;; |
| 1449 |
hppa1.1-hp-hpux*) |
| 1450 |
AC_CHECK_LIB(cl, FTN_QATAN, [F77LIBS="$F77LIBS -lcl"], , $F77LIBS) |
| 1451 |
;; |
| 1452 |
*-ibm-aix*) |
| 1453 |
# need to add -lc before -lxlf on AIX to |
| 1454 |
# avoid getting the wrong getenv |
| 1455 |
F77LIBS="-lc $F77LIBS" |
| 1456 |
AC_CHECK_LIB(xlf, _xldabs, [F77LIBS="$F77LIBS -lxlf"], , $F77LIBS) |
| 1457 |
AC_CHECK_LIB(xlfutil, srand_, [F77LIBS="$F77LIBS -lxlfutil"], , |
| 1458 |
$F77LIBS) |
| 1459 |
AC_CHECK_LIB(xlf90, printf, |
| 1460 |
[F77LIBS="$F77LIBS -lxlf90"], , $F77LIBS) |
| 1461 |
;; |
| 1462 |
*-linux-*) |
| 1463 |
AC_CHECK_LIB(f2c, pow_dd, [F77LIBS="$F77LIBS -lf2c"], , $F77LIBS) |
| 1464 |
AC_CHECK_LIB(g2c, pow_dd, [F77LIBS="$F77LIBS -lg2c"], , $F77LIBS) |
| 1465 |
;; |
| 1466 |
sparc-sun-solaris*) |
| 1467 |
if test -n "$GCC" ; then |
| 1468 |
F77LIBS="-L/opt/SUNWspro/lib -R/opt/SUNWspro/lib" |
| 1469 |
fi |
| 1470 |
AC_CHECK_LIB(sunmath, d_sqrt_, [MATH_LIBS="-lsunmath $MATH_LIBS"]) |
| 1471 |
AC_CHECK_LIB(F77, f77_init, |
| 1472 |
[F77LIBS="$F77LIBS -lF77"], , $F77LIBS $MATH_LIBS) |
| 1473 |
AC_CHECK_LIB(M77, inmax_, |
| 1474 |
[F77LIBS="$F77LIBS -lM77"], , $F77LIBS $MATH_LIBS) |
| 1475 |
;; |
| 1476 |
sparc-sun-sunos4*) |
| 1477 |
if test -n "$GCC" ; then |
| 1478 |
F77LIBS="-L/usr/lang/lib" |
| 1479 |
fi |
| 1480 |
AC_CHECK_LIB(F77, f77_init, [F77LIBS="$F77LIBS -lF77"], , $F77LIBS) |
| 1481 |
AC_CHECK_LIB(M77, inmax_, [F77LIBS="$F77LIBS -lM77"], , $F77LIBS) |
| 1482 |
;; |
| 1483 |
mips-sgi-irix*) |
| 1484 |
AC_CHECK_LIB(F77, s_copy, [F77LIBS="$F77LIBS -lF77"], , $F77LIBS) |
| 1485 |
AC_CHECK_LIB(I77, f_exit, [F77LIBS="$F77LIBS -lI77"], , $F77LIBS) |
| 1486 |
AC_CHECK_LIB(isam, mkidxname, |
| 1487 |
[F77LIBS="$F77LIBS -lisam"], , $F77LIBS) |
| 1488 |
;; |
| 1489 |
*) |
| 1490 |
AC_CHECK_LIB(F77, printf, [F77LIBS="$F77LIBS -lF77"], , $F77LIBS) |
| 1491 |
AC_CHECK_LIB(M77, printf, [F77LIBS="$F77LIBS -lM77"], , $F77LIBS) |
| 1492 |
AC_CHECK_LIB(f2c, pow_dd, [F77LIBS="$F77LIBS -lf2c"], , $F77LIBS) |
| 1493 |
AC_CHECK_LIB(f77, printf, [F77LIBS="$F77LIBS -lf77"], , $F77LIBS) |
| 1494 |
AC_CHECK_LIB(for, printf, [F77LIBS="$F77LIBS -lfor"], , $F77LIBS) |
| 1495 |
AC_CHECK_LIB(ots, printf, [F77LIBS="$F77LIBS -lots"], , $F77LIBS) |
| 1496 |
AC_CHECK_LIB(Ufor, printf, [F77LIBS="$F77LIBS -lUfor"], , $F77LIBS) |
| 1497 |
;; |
| 1498 |
esac |
| 1499 |
fi |
| 1500 |
|
| 1501 |
# asc_subdirs are the extra fortran subdirectories we have to visit |
| 1502 |
# to build the fortran libraries. Initialize it to empty here. |
| 1503 |
asc_subdirs='' |
| 1504 |
|
| 1505 |
# Initialize the blas variables |
| 1506 |
make_blaslib='' |
| 1507 |
|
| 1508 |
AC_ARG_WITH(blas, |
| 1509 |
[ --with-blas=BLASLIB The full path to the blas library. |
| 1510 |
Use '--with-blas=build' to build the blas library |
| 1511 |
from the sources that come with the distribution.], |
| 1512 |
, [with_blas=yes] ) |
| 1513 |
case "$with_fortran$with_blas" in |
| 1514 |
no*) |
| 1515 |
# Fortran is disabled; ignore this option (if present) |
| 1516 |
BLASLIB= |
| 1517 |
;; |
| 1518 |
*no) |
| 1519 |
# It is an error if the user chooses to build without |
| 1520 |
# the BLAS library if Fortran is enabled. |
| 1521 |
AC_MSG_ERROR([Bad option '--without-blas' |
| 1522 |
To support Fortran calls, ASCEND must be compiled with a blas library]) |
| 1523 |
;; |
| 1524 |
*build) |
| 1525 |
# Fortran is enabled and the user specified --with-blas=build |
| 1526 |
# For a search for BLAS source code and tell the Makefile |
| 1527 |
# to build it; useful for testing configure. |
| 1528 |
#AWW20041206: blas_src_file="$srcdir/blas/dcopy.f" |
| 1529 |
blas_src_file="$srcdir/../../blas/dcopy.f" |
| 1530 |
AC_MSG_CHECKING([for blas source file $blas_src_file ]) |
| 1531 |
if test -f $blas_src_file ; then |
| 1532 |
AC_MSG_RESULT(yes) |
| 1533 |
#AWW20041119: BLASLIB="$ascpwd/ascend4/archive/libascblas.a" |
| 1534 |
BLASLIB="$ascpwd/../generic/archive/libascblas.a" |
| 1535 |
make_blaslib='make-blaslib' |
| 1536 |
#AWW20041206: blaslib_makefile="blas/Makefile" |
| 1537 |
blaslib_makefile="../../blas/Makefile" |
| 1538 |
#AWW20041206: asc_subdirs="$asc_subdirs ../blas" |
| 1539 |
asc_subdirs="$asc_subdirs ../../blas" |
| 1540 |
else |
| 1541 |
AC_MSG_RESULT(no) |
| 1542 |
AC_MSG_ERROR([User specified '--with-blas=build' but |
| 1543 |
configure cannot find the blas source file $blas_src_file]) |
| 1544 |
fi |
| 1545 |
;; |
| 1546 |
*yes) |
| 1547 |
# Fortran in enabled and the user didn't give the --with-blas |
| 1548 |
# option or didn't give the library's location. |
| 1549 |
# Search for a compiled libblas.a or libascblas.a; if that |
| 1550 |
# fails, look for BLAS source code; if that also fails, |
| 1551 |
# disable all Fortran and print a warning. |
| 1552 |
AC_PATH_PROGS(BLASLIB, libblas.a libascblas.a, , $asc_f77_support_dirs) |
| 1553 |
blas_src_file="$srcdir/../../blas/dcopy.f" |
| 1554 |
if test -z "$BLASLIB" -a -n "$blas_src_file" ; then |
| 1555 |
AC_MSG_CHECKING([for blas source file $blas_src_file ]) |
| 1556 |
if test -f $blas_src_file ; then |
| 1557 |
AC_MSG_RESULT(yes) |
| 1558 |
#AWW20041119: BLASLIB="$ascpwd/ascend4/archive/libascblas.a" |
| 1559 |
BLASLIB="$ascpwd/../generic/archive/libascblas.a" |
| 1560 |
make_blaslib='make-blaslib' |
| 1561 |
#AWW20041206: blaslib_makefile="blas/Makefile" |
| 1562 |
blaslib_makefile="../../blas/Makefile" |
| 1563 |
#AWW20041206: asc_subdirs="$asc_subdirs ../blas" |
| 1564 |
asc_subdirs="$asc_subdirs ../../blas" |
| 1565 |
else |
| 1566 |
AC_MSG_RESULT(no) |
| 1567 |
fi |
| 1568 |
fi |
| 1569 |
if test -z "$BLASLIB" ; then |
| 1570 |
with_fortran=no |
| 1571 |
AC_MSG_WARN([Cannot find libblas.a, libascblas.a, nor blas |
| 1572 |
source code. Building ASCEND without integration, MINOS, and CONOPT |
| 1573 |
support. To specify a specific location for the blas library, run |
| 1574 |
configure again with the argument: |
| 1575 |
--with-blas=BLASLIB |
| 1576 |
where BLASLIB is the full path to the blas library file.]) |
| 1577 |
fi |
| 1578 |
;; |
| 1579 |
*) |
| 1580 |
# The user gave us --with-blas=BLASLIB, use that as the |
| 1581 |
# location of the BLAS library. |
| 1582 |
BLASLIB="$with_blas" |
| 1583 |
;; |
| 1584 |
esac |
| 1585 |
|
| 1586 |
|
| 1587 |
# Initialize the linpack variables |
| 1588 |
make_lpaklib='' |
| 1589 |
|
| 1590 |
AC_ARG_WITH(linpack, |
| 1591 |
[ --with-linpack=LPAKLIB The full path to the linpack library. |
| 1592 |
Use '--with-linpack=build' to build the library |
| 1593 |
from the sources that come with the distribution.], |
| 1594 |
, [with_linpack=yes] ) |
| 1595 |
case "$with_fortran$with_linpack" in |
| 1596 |
no*) |
| 1597 |
# Fortran is disabled; ignore this option (if present) |
| 1598 |
LPAKLIB= |
| 1599 |
;; |
| 1600 |
*no) |
| 1601 |
# It is an error if the user chooses to build without |
| 1602 |
# the LINPACK library if Fortran is enabled. |
| 1603 |
AC_MSG_ERROR([Bad option '--without-linpack' |
| 1604 |
To support Fortran calls, ASCEND must be compiled with a |
| 1605 |
linpack library.]) |
| 1606 |
;; |
| 1607 |
*build) |
| 1608 |
# Fortran is enabled and the user specified --with-linpack=build |
| 1609 |
# For a search for LINPACK source code and tell the Makefile |
| 1610 |
# to build it; useful for testing configure. |
| 1611 |
lpak_src_file="$srcdir/../../linpack/d1mach.f" |
| 1612 |
AC_MSG_CHECKING([for linpack source file $lpak_src_file ]) |
| 1613 |
if test -f $lpak_src_file ; then |
| 1614 |
AC_MSG_RESULT(yes) |
| 1615 |
#AWW20041119: LPAKLIB="$ascpwd/ascend4/archive/libasclpak.a" |
| 1616 |
LPAKLIB="$ascpwd/../generic/archive/libasclpak.a" |
| 1617 |
make_lpaklib='make-lpaklib' |
| 1618 |
#AWW20041206: lpaklib_makefile="linpack/Makefile" |
| 1619 |
lpaklib_makefile="../../linpack/Makefile" |
| 1620 |
#AWW20041206: asc_subdirs="$asc_subdirs ../linpack" |
| 1621 |
asc_subdirs="$asc_subdirs ../../linpack" |
| 1622 |
else |
| 1623 |
AC_MSG_RESULT(no) |
| 1624 |
AC_MSG_ERROR([User specified '--with-linpack=build' but |
| 1625 |
configure cannot find the linpack source file $lpak_src_file]) |
| 1626 |
fi |
| 1627 |
;; |
| 1628 |
*yes) |
| 1629 |
# Fortran in enabled and the user didn't give the --with-linpack |
| 1630 |
# option or didn't give the library's location. |
| 1631 |
# Search for a compiled liblpak.a or libasclpak.a; if that |
| 1632 |
# fails, look for LINPACK source code; if that also fails, |
| 1633 |
# disable all Fortran and print a warning. |
| 1634 |
AC_PATH_PROGS(LPAKLIB, liblpak.a libasclpak.a, , $asc_f77_support_dirs) |
| 1635 |
lpak_src_file="$srcdir/../../linpack/d1mach.f" |
| 1636 |
if test -z "$LPAKLIB" -a -n "$lpak_src_file" ; then |
| 1637 |
AC_MSG_CHECKING([for linpack source file $lpak_src_file ]) |
| 1638 |
if test -f $lpak_src_file ; then |
| 1639 |
AC_MSG_RESULT(yes) |
| 1640 |
#AWW20041119: LPAKLIB="$ascpwd/ascend4/archive/libasclpak.a" |
| 1641 |
LPAKLIB="$ascpwd/../generic/archive/libasclpak.a" |
| 1642 |
make_lpaklib='make-lpaklib' |
| 1643 |
#AWW20041206: lpaklib_makefile="linpack/Makefile" |
| 1644 |
lpaklib_makefile="../../linpack/Makefile" |
| 1645 |
#AWW20041206: asc_subdirs="$asc_subdirs ../linpack" |
| 1646 |
asc_subdirs="$asc_subdirs ../../linpack" |
| 1647 |
else |
| 1648 |
AC_MSG_RESULT(no) |
| 1649 |
fi |
| 1650 |
fi |
| 1651 |
if test -z "$LPAKLIB" ; then |
| 1652 |
with_fortran=no |
| 1653 |
AC_MSG_WARN([Cannot find liblpak.a, libasclpak.a, nor linpack |
| 1654 |
source code. Building ASCEND without integration, MINOS, and CONOPT |
| 1655 |
support. To specify a specific location for the linpack library, run |
| 1656 |
configure again with the argument: |
| 1657 |
--with-linpack=LPAKLIB |
| 1658 |
where LPAKLIB is the full path to the linpack library file.]) |
| 1659 |
fi |
| 1660 |
;; |
| 1661 |
*) |
| 1662 |
# The user gave us --with-linkpack=LINKPACKLIB, use that |
| 1663 |
# as the location of the LINKPACK library. |
| 1664 |
LPAKLIB="$with_linpack" |
| 1665 |
;; |
| 1666 |
esac |
| 1667 |
|
| 1668 |
|
| 1669 |
# Initialize the lsod variables |
| 1670 |
make_lsodlib='' |
| 1671 |
HAVE_LSOD='' |
| 1672 |
|
| 1673 |
AC_ARG_WITH(lsod, |
| 1674 |
[ --with-lsod=LSODLIB The full path to the lsod library. |
| 1675 |
Use '--with-lsod=build' to build the lsod library |
| 1676 |
from the sources that come with the distribution.], |
| 1677 |
, [with_lsod=yes] ) |
| 1678 |
case "$with_fortran$with_lsod" in |
| 1679 |
no*) |
| 1680 |
# Fortran is disabled; ignore this option (if present) |
| 1681 |
LSODLIB= |
| 1682 |
with_lsod=no |
| 1683 |
;; |
| 1684 |
*no) |
| 1685 |
# Fortran is enabled but the user specified --without-lsod |
| 1686 |
LSODLIB= |
| 1687 |
;; |
| 1688 |
*build) |
| 1689 |
# Fortran is enabled and the user specified --with-lsod=build |
| 1690 |
# For a search for LSOD source code and tell the Makefile |
| 1691 |
# to build it; useful for testing configure. |
| 1692 |
lsod_src_file="$srcdir/../../lsod/lsode.f" |
| 1693 |
AC_MSG_CHECKING([for lsod source file $lsod_src_file ]) |
| 1694 |
if test -f $lsod_src_file ; then |
| 1695 |
AC_MSG_RESULT(yes) |
| 1696 |
#AWW20041119: LSODLIB="$ascpwd/ascend4/archive/libinteg.a" |
| 1697 |
LSODLIB="$ascpwd/../generic/archive/libinteg.a" |
| 1698 |
make_lsodlib='make-lsodlib' |
| 1699 |
#AWW20041206: lsodlib_makefile="lsod/Makefile" |
| 1700 |
lsodlib_makefile="../../lsod/Makefile" |
| 1701 |
#AWW20041206: asc_subdirs="$asc_subdirs ../lsod" |
| 1702 |
asc_subdirs="$asc_subdirs ../../lsod" |
| 1703 |
HAVE_LSOD='-DSTATIC_LSOD' |
| 1704 |
else |
| 1705 |
AC_MSG_RESULT(no) |
| 1706 |
AC_MSG_ERROR([User specified '--with-lsod=build' but |
| 1707 |
configure cannot find the lsod source file $lsod_src_file]) |
| 1708 |
fi |
| 1709 |
;; |
| 1710 |
*yes) |
| 1711 |
# Fortran in enabled and the user didn't give the --with-lsod |
| 1712 |
# option or didn't give the library's location. |
| 1713 |
# Search for a compiled libinteg.a; if that fails, look |
| 1714 |
# for LSOD source code; if that also fails, disable LSOD |
| 1715 |
# and print a warning. |
| 1716 |
AC_PATH_PROGS(LSODLIB, libinteg.a libasclsod.a, , $asc_f77_support_dirs) |
| 1717 |
lsod_src_file="$srcdir/../../lsod/lsode.f" |
| 1718 |
if test -z "$LSODLIB" -a -n "$lsod_src_file" ; then |
| 1719 |
AC_MSG_CHECKING([for lsod source file $lsod_src_file ]) |
| 1720 |
if test -f $lsod_src_file ; then |
| 1721 |
AC_MSG_RESULT(yes) |
| 1722 |
#AWW20041119: LSODLIB="$ascpwd/ascend4/archive/libinteg.a" |
| 1723 |
LSODLIB="$ascpwd/../generic/archive/libinteg.a" |
| 1724 |
make_lsodlib='make-lsodlib' |
| 1725 |
#AWW20041206: lsodlib_makefile="lsod/Makefile" |
| 1726 |
lsodlib_makefile="../../lsod/Makefile" |
| 1727 |
#AWW20041206: asc_subdirs="$asc_subdirs ../lsod" |
| 1728 |
asc_subdirs="$asc_subdirs ../../lsod" |
| 1729 |
else |
| 1730 |
AC_MSG_RESULT(no) |
| 1731 |
fi |
| 1732 |
fi |
| 1733 |
if test -z "$LSODLIB" ; then |
| 1734 |
with_lsod=no |
| 1735 |
AC_MSG_WARN([Cannot find libinteg.a nor the lsod |
| 1736 |
source code. Building ASCEND without integration |
| 1737 |
support. To specify a specific location for the lsod library, run |
| 1738 |
configure again with the argument: |
| 1739 |
--with-lsod=LSODLIB |
| 1740 |
where LSODLIB is the full path to the lsod integration library file.]) |
| 1741 |
else |
| 1742 |
HAVE_LSOD='-DSTATIC_LSOD' |
| 1743 |
fi |
| 1744 |
;; |
| 1745 |
*) |
| 1746 |
# The user gave us --with-lsod=LSODLIB, use that as the |
| 1747 |
# location of the LSOD library and define -DSTATIC_LSOD. |
| 1748 |
LSODLIB="$with_lsod" |
| 1749 |
HAVE_LSOD='-DSTATIC_LSOD' |
| 1750 |
;; |
| 1751 |
esac |
| 1752 |
|
| 1753 |
|
| 1754 |
#-------------------------------------------------------------------- |
| 1755 |
# Other trees which may or may not be present. If present, |
| 1756 |
# generate the Makefiles in the tree unless the user passes in |
| 1757 |
# a --without-<package> argument. |
| 1758 |
# |
| 1759 |
# Valid <package> values are: TK, models, help |
| 1760 |
# |
| 1761 |
# We could have `configure' do this for us via |
| 1762 |
# AC_CONFIG_SUBDIRS, but `configure' scripts in the trees can |
| 1763 |
# only be one directory removed from this configure script. |
| 1764 |
# For example, it would be nice to have `models' under |
| 1765 |
# `ascend4', but `configure' doesn't like `ascend4/models' as |
| 1766 |
# an argument to AC_CONFIG_SUBDIRS. |
| 1767 |
# |
| 1768 |
# To get around this problem, we do things by hand. :-) |
| 1769 |
# |
| 1770 |
# If the user gives a --without-<package> argument, we have |
| 1771 |
# nothing to do for that package. |
| 1772 |
# |
| 1773 |
# Otherwise, |
| 1774 |
# * Set `subdir_file_exists' to a file that should exist in the |
| 1775 |
# subtree---this is how we know that the subtree is really |
| 1776 |
# there. |
| 1777 |
# * Set `subdir_locations' to the list of locations, relative |
| 1778 |
# to this configure script, where the subtree may live. |
| 1779 |
# * Set `subdir_output' to the list of makefiles to generate; |
| 1780 |
# the variable `subdir_root' in this list will be replaced |
| 1781 |
# with the correct value from `subdir_locations'. |
| 1782 |
# |
| 1783 |
# To see which (if any) of the values in `subdir_locations' is |
| 1784 |
# the correct one, we set `subdir_root' to each value in |
| 1785 |
# `subdir_locations' and check for the existence of |
| 1786 |
# $fullpathsrcdir/$subdir_root/$subdir_file_exists, where |
| 1787 |
# $fullpathsrcdir is the full path to the source directory. If |
| 1788 |
# that file exists, we |
| 1789 |
# * Set <package>_dir_root to ../$subdir_root. The "../" is |
| 1790 |
#AWW20041208:# needed since this value is used in the `ascend4' directory |
| 1791 |
# needed since this value is used in the `generic' directory |
| 1792 |
#AWW20041208:# and $subdir_root is relative to the parent of `ascend4'. |
| 1793 |
# and $subdir_root is relative to the parent of `generic'. |
| 1794 |
# * Substitute the value of $subdir_root into `subdir_output' |
| 1795 |
# and set the result to <package>_makefiles: the list of |
| 1796 |
# Makefiles for configure to generate. |
| 1797 |
# * Each package needs to be able to find its way back to |
| 1798 |
# ascend4/ConfigAscend; it needs to go back up the tree |
| 1799 |
# however many levels deep it is---i.e., `foo/bar/baz' should |
| 1800 |
# become `../../..' and this does it: sed 's,[^/][^/]*,..,g' |
| 1801 |
# but we need to quote the [] from m4, so we get this bizarre |
| 1802 |
# thing: sed 's,[[^/][^/]]*,..,g' Set <package>_topbuilddir |
| 1803 |
# to this result. |
| 1804 |
# * Exit the loop. |
| 1805 |
#-------------------------------------------------------------------- |
| 1806 |
|
| 1807 |
# Initialize variables |
| 1808 |
tkdir_root='' |
| 1809 |
tkdir_topbuilddir='' |
| 1810 |
|
| 1811 |
AC_ARG_WITH(tkdir, |
| 1812 |
[Generation of Makefiles: |
| 1813 |
--without-tkdir do not generate Makefiles in the TK subdir], |
| 1814 |
, [with_tkdir=yes]) |
| 1815 |
if test ! "X$with_tkdir" = "Xno" ; then |
| 1816 |
subdir_file_exists='AscendRC' |
| 1817 |
#AWW20041117: FIXME next line |
| 1818 |
#AWW20041206: subdir_locations='ascend4/TK' |
| 1819 |
subdir_locations='../../tcltk98/TK' |
| 1820 |
subdir_output=' |
| 1821 |
$subdir_root/Makefile |
| 1822 |
$subdir_root/Makefile.Rules:$subdir_root/Makefile.Rules.in |
| 1823 |
$subdir_root/bitmaps/Makefile |
| 1824 |
$subdir_root/templates/Makefile |
| 1825 |
' |
| 1826 |
for subdir_root in $subdir_locations ; do |
| 1827 |
if test -f $fullpathsrcdir/$subdir_root/$subdir_file_exists ; then |
| 1828 |
#AWW20041208: tkdir_root="../$subdir_root" |
| 1829 |
tkdir_root="$subdir_root" |
| 1830 |
tkdir_makefiles=`eval echo $subdir_output` |
| 1831 |
tkdir_topbuilddir=`echo "$subdir_root" | sed 's,[[^/][^/]]*,..,g'` |
| 1832 |
break |
| 1833 |
fi |
| 1834 |
done |
| 1835 |
fi |
| 1836 |
|
| 1837 |
# Initialize variables |
| 1838 |
models_dir_root='' |
| 1839 |
models_topbuilddir='' |
| 1840 |
|
| 1841 |
AC_ARG_WITH(models, |
| 1842 |
[ --without-models do not generate Makefiles in the models subdir], |
| 1843 |
, [with_models=yes]) |
| 1844 |
if test ! "X$with_models" = "Xno" ; then |
| 1845 |
subdir_file_exists='system.a4l' |
| 1846 |
#AWW20041117: FIXME next line |
| 1847 |
#AWW20041206: subdir_locations='models ascend4/models' |
| 1848 |
subdir_locations='models ../../base/generic/models' |
| 1849 |
subdir_output=' |
| 1850 |
$subdir_root/Makefile |
| 1851 |
$subdir_root/Makefile.Rules:$subdir_root/Makefile.Rules.in |
| 1852 |
$subdir_root/ben/Makefile |
| 1853 |
' |
| 1854 |
## $subdir_root/examples/Makefile |
| 1855 |
## $subdir_root/examples/abbott/Makefile |
| 1856 |
## $subdir_root/examples/flexible_design/Makefile |
| 1857 |
## $subdir_root/libraries/Makefile |
| 1858 |
## $subdir_root/libraries/abbott/Makefile |
| 1859 |
## $subdir_root/pending/Makefile |
| 1860 |
## $subdir_root/pending/examples/Makefile |
| 1861 |
## $subdir_root/pending/libraries/Makefile |
| 1862 |
for subdir_root in $subdir_locations ; do |
| 1863 |
if test -f $fullpathsrcdir/$subdir_root/$subdir_file_exists ; then |
| 1864 |
#AWW20041208: models_dir_root="../$subdir_root" |
| 1865 |
models_dir_root="$subdir_root" |
| 1866 |
models_makefiles=`eval echo $subdir_output` |
| 1867 |
models_topbuilddir=`echo "$subdir_root" | sed 's,[[^/][^/]]*,..,g'` |
| 1868 |
break |
| 1869 |
fi |
| 1870 |
done |
| 1871 |
fi |
| 1872 |
|
| 1873 |
|
| 1874 |
# Initialize variables |
| 1875 |
help_dir_root='' |
| 1876 |
help_topbuilddir='' |
| 1877 |
|
| 1878 |
dnl >>>>AC_ARG_WITH(help, |
| 1879 |
dnl >>>> [ --without-help do not generate Makefiles in the help subdir], |
| 1880 |
dnl >>>> , [with_help=yes]) |
| 1881 |
dnl >>>>if test ! "X$with_help" = "Xno" ; then |
| 1882 |
dnl >>>> subdir_file_exists='ascend-helpTOC.htm' |
| 1883 |
dnl >>>> subdir_locations='help ascend4/help' |
| 1884 |
dnl >>>> subdir_output=' |
| 1885 |
dnl >>>> $subdir_root/Makefile |
| 1886 |
dnl >>>> $subdir_root/Makefile.Rules:$subdir_root/Makefile.Rules.in |
| 1887 |
dnl >>>> $subdir_root/Screenshots/Makefile |
| 1888 |
dnl >>>> ' |
| 1889 |
dnl >>>> for subdir_root in $subdir_locations ; do |
| 1890 |
dnl >>>> if test -f $fullpathsrcdir/$subdir_root/$subdir_file_exists ; then |
| 1891 |
dnl >>>> help_dir_root="../$subdir_root" |
| 1892 |
dnl >>>> help_makefiles=`eval echo $subdir_output` |
| 1893 |
dnl >>>> help_topbuilddir=`echo "$subdir_root" | sed 's,[[^/][^/]]*,..,g'` |
| 1894 |
dnl >>>> break |
| 1895 |
dnl >>>> fi |
| 1896 |
dnl >>>> done |
| 1897 |
dnl >>>>fi |
| 1898 |
|
| 1899 |
|
| 1900 |
#-------------------------------------------------------------------- |
| 1901 |
# The variables we substitute into the Makefile.in files |
| 1902 |
# and the command to actually generate the Makefiles |
| 1903 |
#-------------------------------------------------------------------- |
| 1904 |
AC_SUBST(ascpwd) |
| 1905 |
AC_SUBST(fullpathsrcdir) |
| 1906 |
AC_SUBST(asc_include) |
| 1907 |
AC_SUBST(CC) |
| 1908 |
AC_SUBST(CFLAGS) |
| 1909 |
AC_SUBST(LEX) |
| 1910 |
AC_SUBST(LEXLIB) |
| 1911 |
AC_SUBST(scanner_src) |
| 1912 |
AC_SUBST(typer_src) |
| 1913 |
AC_SUBST(MATH_LIBS) |
| 1914 |
AC_SUBST(DEBUG_LIBS) |
| 1915 |
AC_SUBST(X11_INCLUDES) |
| 1916 |
AC_SUBST(X11_LIBRARIES) |
| 1917 |
AC_SUBST(X11_RUN_PATH) |
| 1918 |
AC_SUBST(X11_EXTRA_LIBS) |
| 1919 |
AC_SUBST(DL_LIBS) |
| 1920 |
AC_SUBST(LD_FLAGS) |
| 1921 |
AC_SUBST(LD_SEARCH_FLAGS) |
| 1922 |
AC_SUBST(SHLIB_CFLAGS) |
| 1923 |
AC_SUBST(SHLIB_LD) |
| 1924 |
AC_SUBST(SHLIB_LD_LIBS) |
| 1925 |
AC_SUBST(SHLIB_SUFFIX) |
| 1926 |
AC_SUBST(ASC_LIB_SUFFIX) |
| 1927 |
AC_SUBST(TCL_LIB) |
| 1928 |
AC_SUBST(TCL_HDR) |
| 1929 |
AC_SUBST(TK_LIB) |
| 1930 |
AC_SUBST(TK_HDR) |
| 1931 |
AC_SUBST(TKTABLE_LIB) |
| 1932 |
AC_SUBST(ASC_TK_LIBRARY) |
| 1933 |
AC_SUBST(ASC_TCL_LIBRARY) |
| 1934 |
AC_SUBST(HAVE_TKTABLE) |
| 1935 |
AC_SUBST(asc_subdirs) |
| 1936 |
AC_SUBST(F77) |
| 1937 |
AC_SUBST(F77LIBS) |
| 1938 |
AC_SUBST(BLASLIB) |
| 1939 |
AC_SUBST(make_blaslib) |
| 1940 |
AC_SUBST(LPAKLIB) |
| 1941 |
AC_SUBST(make_lpaklib) |
| 1942 |
AC_SUBST(LSODLIB) |
| 1943 |
AC_SUBST(make_lsodlib) |
| 1944 |
AC_SUBST(HAVE_LSOD) |
| 1945 |
#AWW20041113: AC_SUBST(OPTSQPLIB) |
| 1946 |
#AWW20041113: AC_SUBST(make_rsqplib) |
| 1947 |
#AWW20041113: AC_SUBST(HAVE_OPTSQP) |
| 1948 |
#AWW20041113: dnl AC_SUBST(HARWELLLIB) |
| 1949 |
#AWW20041113: dnl AC_SUBST(make_harwelllib) |
| 1950 |
#AWW20041113: dnl AC_SUBST(HAVE_HARWELL) |
| 1951 |
#AWW20041113: AC_SUBST(MINOSLIB) |
| 1952 |
#AWW20041113: AC_SUBST(make_minoslib) |
| 1953 |
#AWW20041113: AC_SUBST(HAVE_MINOS) |
| 1954 |
#AWW20041113: AC_SUBST(CONOPTLIB) |
| 1955 |
#AWW20041113: AC_SUBST(make_conoptlib) |
| 1956 |
#AWW20041113: AC_SUBST(HAVE_CONOPT) |
| 1957 |
AC_SUBST(tkdir_root) |
| 1958 |
AC_SUBST(tkdir_topbuilddir) |
| 1959 |
AC_SUBST(models_dir_root) |
| 1960 |
AC_SUBST(models_topbuilddir) |
| 1961 |
AC_SUBST(help_dir_root) |
| 1962 |
AC_SUBST(help_topbuilddir) |
| 1963 |
|
| 1964 |
#AWW20041129: In the following macro, replace the following |
| 1965 |
#AWW20041129: in the call. |
| 1966 |
#AWW20041129: |
| 1967 |
#AWW20041113: ascend4/ConfigAscend:ascend4/ConfigAscend.in |
| 1968 |
#AWW20041113: ascend4/Makefile |
| 1969 |
#AWW20041113: ascend4/bin/ascend4.sh |
| 1970 |
#AWW20041113: ascend4/Makefile.Rules:ascend4/Makefile.Rules.in |
| 1971 |
#AWW20041113: ascend4/archive/Makefile |
| 1972 |
#AWW20041113: ascend4/bin/Makefile |
| 1973 |
#AWW20041113: ascend4/compiler/Makefile |
| 1974 |
#AWW20041113: ascend4/general/Makefile |
| 1975 |
#AWW20041113: ascend4/interface/Makefile |
| 1976 |
#AWW20041113: ascend4/lib/Makefile |
| 1977 |
#AWW20041113: ascend4/packages/Makefile |
| 1978 |
#AWW20041113: ascend4/solver/Makefile |
| 1979 |
#AWW20041113: ascend4/utilities/Makefile |
| 1980 |
#AWW20041129: |
| 1981 |
#AWW20041129: and remove the following |
| 1982 |
#AWW20041129: |
| 1983 |
#AWW20041117: $rsqplib_makefile |
| 1984 |
#AWW20041117: $conoptlib_makefile |
| 1985 |
#AWW20041117: $minoslib_makefile |
| 1986 |
|
| 1987 |
#AWW20041216: Mark suggested using the following - except for last |
| 1988 |
#AWW20041216: except for last six items. Do they matter? |
| 1989 |
AC_OUTPUT( |
| 1990 |
ConfigAscend:../../base/generic/ConfigAscend.in |
| 1991 |
Makefile:../../base/generic/Makefile.in |
| 1992 |
bin/ascend4.sh:../../base/generic/bin/ascend4.sh.in |
| 1993 |
Makefile.Rules:../../base/generic/Makefile.Rules.in |
| 1994 |
archive/Makefile:../../base/generic/archive/Makefile.in |
| 1995 |
bin/Makefile:../../base/generic/bin/Makefile.in |
| 1996 |
compiler/Makefile:../../base/generic/compiler/Makefile.in |
| 1997 |
general/Makefile:../../base/generic/general/Makefile.in |
| 1998 |
interface/Makefile:../../tcltk98/generic/interface/Makefile.in |
| 1999 |
lib/Makefile:../../base/generic/lib/Makefile.in |
| 2000 |
packages/Makefile:../../base/generic/packages/Makefile.in |
| 2001 |
solver/Makefile:../../base/generic/solver/Makefile.in |
| 2002 |
utilities/Makefile:../../base/generic/utilities/Makefile.in |
| 2003 |
$tkdir_makefiles |
| 2004 |
$models_makefiles |
| 2005 |
$help_makefiles |
| 2006 |
$blaslib_makefile |
| 2007 |
$lpaklib_makefile |
| 2008 |
$lsodlib_makefile |
| 2009 |
) |
| 2010 |
|
| 2011 |
#AC_OUTPUT( |
| 2012 |
# ../../base/generic/ConfigAscend:../../base/generic/ConfigAscend.in |
| 2013 |
# ../../base/generic/Makefile |
| 2014 |
# ../../base/generic/bin/ascend4.sh |
| 2015 |
# ../../base/generic/Makefile.Rules:../../base/generic/Makefile.Rules.in |
| 2016 |
# ../../base/generic/archive/Makefile |
| 2017 |
# ../../base/generic/bin/Makefile |
| 2018 |
# ../../base/generic/compiler/Makefile |
| 2019 |
# ../../base/generic/general/Makefile |
| 2020 |
# ../../tcltk98/generic/interface/Makefile |
| 2021 |
# ../../base/generic/lib/Makefile |
| 2022 |
# ../../base/generic/packages/Makefile |
| 2023 |
# ../../base/generic/solver/Makefile |
| 2024 |
# ../../base/generic/utilities/Makefile |
| 2025 |
# $tkdir_makefiles |
| 2026 |
# $models_makefiles |
| 2027 |
# $help_makefiles |
| 2028 |
# $blaslib_makefile |
| 2029 |
# $lpaklib_makefile |
| 2030 |
# $lsodlib_makefile |
| 2031 |
# ) |
Parent Directory
| 
Revision Log