/[ascend]/trunk/base/unixAC213/configure.in
ViewVC logotype

Contents of /trunk/base/unixAC213/configure.in

Parent Directory Parent Directory | Revision Log Revision Log


Revision 12 - (show annotations) (download)
Sat Nov 13 20:52:45 2004 UTC (19 years, 8 months ago) by aw0a
File size: 65087 byte(s)
committing partly modified configure.in plus the moving of config/
1 #--------------------------------------------------------------------
2 # A configure.in file for ASCEND.
3 #
4 # Process `configure.in' file with `autoconf' to produce
5 # a `configure' script. This `configure.in' was prepared
6 # for AutoConf v2.59.
7 #--------------------------------------------------------------------
8
9 #--------------------------------------------------------------------
10 # Disable caching since it seems to get in the way
11 # more times than it helps us.
12 #--------------------------------------------------------------------
13 define([AC_CACHE_LOAD], )dnl
14 define([AC_CACHE_SAVE], )dnl
15
16
17 #--------------------------------------------------------------------
18 # This file must exist for configure to continue. It's
19 # how we know we're in the right place.
20 #--------------------------------------------------------------------
21 ##AWW20041113: AC_INIT(ascend4/compiler/ascParse.y)
22 AC_INIT(../generic/compiler/ascParse.y)
23
24
25 #--------------------------------------------------------------------
26 # CVS Most Recent Revision Data
27 # Put this data after AC_INIT since we want this information
28 # to also appear in configure and autoconf, when creating
29 # configure, strips all comments that appear in configure.in
30 # before AC_INIT
31 # $Revision: 1.38 $
32 # $Date: 2003/11/23 19:36:39 $
33 # $Author: ballan $
34 # $Source: /afs/cs.cmu.edu/project/ascend/Repository/configure.in,v $
35 #--------------------------------------------------------------------
36
37
38 #--------------------------------------------------------------------
39 # Where configure should look for files it needs.
40 #--------------------------------------------------------------------
41 AC_CONFIG_AUX_DIR(config)
42
43 #--------------------------------------------------------------------
44 # Set the output variables prefix and exec_prefix that
45 # determine where things will be installed.
46 #--------------------------------------------------------------------
47 if test "${prefix}" = "NONE"; then
48 prefix=/usr/local
49 fi
50 if test "${exec_prefix}" = "NONE"; then
51 exec_prefix=$prefix
52 fi
53
54
55 #--------------------------------------------------------------------
56 # For the Fortran support libraries and the TCL/TK libraries
57 # and header files, we unfortunately need the full path to
58 # these files. The problem with having the full path is that
59 # if the user moves the source tree, things will break unless
60 # the user re-runs configure.
61 #--------------------------------------------------------------------
62 ##AWW20041113: FIXME - I think this is okay
63 ##AWW ascpwd will be set to the path for the directory one is in
64 ##AWW when invoking configure (which may not be where configure
65 ##AWW is located. So if one invokes it using the instruction
66 ##AWW from /home/me/a4/tmp and invokes ../asc4/configure, ascpwd
67 ##AWW would be set to /home/me/a4/tmp.
68 ascpwd=`pwd`
69 fullpathsrcdir=`cd $srcdir ; pwd`
70
71
72 #--------------------------------------------------------------------
73 # When one invokes configure from where one is, it is done
74 # with the path $srcdir/configure. For example, if one is
75 # in the directory containing configure, one would invoke
76 # ./configure and $srcdir would have the value ".".
77 #
78 # The asc_include variable is (directory) path to the ascend4
79 # SOURCE directory relative to the immediate subdirectories of
80 # the ascend4 OBJECT directory.
81 # -- If we are building in the source directory ($srcdir is "."
82 # asc_include is simply "../."
83 # -- If the user gives us a full path to the configure script,
84 # we just append "../generic" to that full path:
85 # "$scrdir/../generic"
86 # -- For any other value of $srcdir (like ../src/), we go up
87 # two directories (to get to the top of the OBJECT tree,
88 # insert the source directory, and then go back down one
89 # level to the ascend4 directory: "../../$srcdir/../generic"
90 #--------------------------------------------------------------------
91 ##AWW20041113: FIXME??
92 case "$srcdir" in
93 .)
94 asc_include="../$srcdir"
95 ;;
96 /*)
97 #AWW20041113: asc_include="$srcdir/ascend4"
98 asc_include="$srcdir/../generic"
99 ;;
100 *)
101 #AWW20041113: asc_include="../../$srcdir/ascend4"
102 asc_include="../../$srcdir/../generic"
103 ;;
104 esac
105
106
107 #--------------------------------------------------------------------
108 # Do basic checks to determine
109 # * if we have `ranlib'
110 # * if we can create symbolic links
111 # * if `make' sets the MAKE macro
112 # * a bsd-compatible `install' program
113 # If we use the install-sh script that comes with configure,
114 # prefix it with the current directory so it'll work in
115 # subdirectories. Unfortunately, it won't work if the user
116 # moves the source tree.
117 #--------------------------------------------------------------------
118 AC_PROG_RANLIB
119 AC_PROG_LN_S
120 AC_PROG_MAKE_SET
121 AC_PROG_INSTALL
122 ##AWW20041113: FIXME?? No fixing seems necessary.
123 case "X$INSTALL" in
124 X/*)
125 ;;
126 *)
127 INSTALL="$ascpwd/$INSTALL"
128 ;;
129 esac
130
131
132 #--------------------------------------------------------------------
133 # Get the host type for various checks along the way
134 #--------------------------------------------------------------------
135 AC_CANONICAL_HOST
136
137
138 #--------------------------------------------------------------------
139 # Check for the C compiler: set CC and CFLAGS.
140 # If the user does NOT specify `--enable-gcc' on the configure
141 # command command line, set CC to either the envar CC or `cc'.
142 # Call AC_PROG_CC which will use the value of CC (perhaps set
143 # immediately above) or will check for `gcc' and then for `cc'
144 # if `gcc' is not found.
145 #
146 # If we are using GCC, then assume it groks ANSI. Otherwise,
147 # try to compile a small program using ANSI constructs with
148 # CC. If this fails, try to locate each of the following:
149 # c89 xlc acc
150 # and if successful, see if it compiles an ANSI C program.
151 # (Doing this in a loop would be ideal, but configure caches
152 # the result of AC_CHECK_PROG and uses the cached value for
153 # all but the first pass through the loop. This is also the
154 # reason we have to use a different variable asc_cc1, asc_cc2
155 # for each call to AC_CHECK_PROG.
156 #
157 # If we do not find an ANSI C compiler, print a warning and
158 # use the first value of CC we tried.
159 #--------------------------------------------------------------------
160
161 AC_ARG_ENABLE(gcc,
162 [
163 ASCEND specific options
164
165 Compiler options:
166 --enable-gcc allow use of gcc if avaiable],
167 [asc_gcc_ok=$enableval], [asc_gcc_ok=no])
168 if test ! "$asc_gcc_ok" = "yes"; then
169 CC=${CC-cc}
170 fi
171 asc_orig_cc=$CC
172
173 if test "X$asc_gcc_ok" = "Xyes" ; then
174 asc_ansi_ok=yes
175 else
176 AC_MSG_CHECKING(
177 [whether $CC understands const, void*, and function prototypes])
178 AC_TRY_COMPILE( , [
179 int tstproto(int arg1, char * arg2);
180 int tstconst(const int arg1, const char *arg2);
181 int tstvoidp(const int arg1, const void *arg2); ],
182 [ asc_ansi_ok=yes ], [ asc_ansi_ok=no ])
183 AC_MSG_RESULT($asc_ansi_ok)
184 fi
185
186 if test "$asc_ansi_ok" = no ; then
187 AC_CHECK_PROG(asc_cc1, c89, c89, NONE)
188 if test ! "$asc_cc1" = NONE ; then
189 CC=$asc_cc1
190 AC_MSG_CHECKING(
191 [whether $CC understands const, void*, and function prototypes])
192 AC_TRY_COMPILE( , [
193 int tstproto(int arg1, char * arg2);
194 int tstconst(const int arg1, const char *arg2);
195 int tstvoidp(const int arg1, const void *arg2); ],
196 [ asc_ansi_ok=yes ], [ asc_ansi_ok=no ])
197 AC_MSG_RESULT($asc_ansi_ok)
198 fi
199 fi
200
201 if test "$asc_ansi_ok" = no ; then
202 AC_CHECK_PROG(asc_cc2, xlc, xlc, NONE)
203 if test ! "$asc_cc2" = NONE ; then
204 CC=$asc_cc2
205 AC_MSG_CHECKING(
206 [whether $CC understands const, void*, and function prototypes])
207 AC_TRY_COMPILE( , [
208 int tstproto(int arg1, char * arg2);
209 int tstconst(const int arg1, const char *arg2);
210 int tstvoidp(const int arg1, const void *arg2); ],
211 [ asc_ansi_ok=yes ], [ asc_ansi_ok=no ])
212 AC_MSG_RESULT($asc_ansi_ok)
213 fi
214 fi
215
216 if test "$asc_ansi_ok" = no ; then
217 AC_CHECK_PROG(asc_cc3, acc, acc, NONE)
218 if test ! "$asc_cc3" = NONE ; then
219 CC=$asc_cc3
220 AC_MSG_CHECKING(
221 [whether $CC understands const, void*, and function prototypes])
222 AC_TRY_COMPILE( , [
223 int tstproto(int arg1, char * arg2);
224 int tstconst(const int arg1, const char *arg2);
225 int tstvoidp(const int arg1, const void *arg2); ],
226 [ asc_ansi_ok=yes ], [ asc_ansi_ok=no ])
227 AC_MSG_RESULT($asc_ansi_ok)
228 fi
229 fi
230
231 AC_PROG_CC
232
233 if test "$asc_ansi_ok" = no ; then
234 CC=$asc_orig_cc
235 AC_MSG_ERROR([Cannot find an ANSI C compiler. ASCEND will not build
236 without an ANSI compiler. If you have an ANSI compiler which
237 configure is not finding, set the CC environment variable to
238 the full path fo the compiler and rerun configure.])
239 fi
240
241
242 #--------------------------------------------------------------------
243 # Do other misc checks with CC and CFLAGS.
244 #
245 # Determine how to run the C preprocessor.
246 #
247 # If the user specifies --enable-optimization, remove `-g'
248 # from CFLAGS, add `-O' to CFLAGS, and define `NDEBUG'. If
249 # we are not building optimized, check for special libraries
250 # needed for building a debugging binary (currenly only
251 # /usr/lib/end.o under HPUX).
252 #
253 # Check if we're running on AIX; if so, add `-D_ALL_SOURCE'
254 # to CFLAGS.
255 #
256 # Check if we're running on HPUX; if so, add -D_HPUX_SOURCE'
257 # to CFLAGS unless the C preprocessor goes it for us.
258 #--------------------------------------------------------------------
259
260 AC_PROG_CPP
261
262 AC_ARG_ENABLE(optimization,
263 [ --enable-optimization optimize the C code while building ascend],
264 [asc_do_opt="$enableval"], [asc_do_opt=no])
265 if test "$asc_do_opt" = yes; then
266 CFLAGS=`echo "-O $CFLAGS " | sed 's/ -g / /g'`
267 AC_DEFINE(NDEBUG)
268 else
269 AC_PATH_PROG(DEBUG_LIBS, end.o, , /usr/lib)
270 fi
271
272 AC_MSG_CHECKING([for AIX])
273 AC_EGREP_CPP(yes, [
274 #ifdef _AIX
275 yes
276 #endif
277 ], [ asc_aix=yes ; AC_DEFINE(_ALL_SOURCE) ], [asc_aix=no])
278 AC_MSG_RESULT($asc_aix)
279
280 AC_MSG_CHECKING([whether -D_HPUX_SOURCE is needed])
281 AC_EGREP_CPP(yes, [
282 #ifdef __hpux
283 #ifndef _HPUX_SOURCE
284 yes
285 #endif
286 #endif
287 ], [ asc_hpux=yes ; AC_DEFINE(_HPUX_SOURCE) ], [asc_hpux=no])
288 AC_MSG_RESULT($asc_hpux)
289
290 # Check the size of pointers; if cross compiling, assume 32 bit pointers
291 AC_CHECK_SIZEOF(void *, 4)
292
293
294 #--------------------------------------------------------------------
295 # Set YACC.
296 # See if we can find `yacc' ourselves; if not, call the
297 # autoconf macro which looks for `bison' and then for `yacc'
298 #--------------------------------------------------------------------
299 asc_found_yacc=0
300 AC_CHECK_PROG(YACC, yacc, yacc, [asc_found_yacc=no])
301 if test "$asc_found_yacc" = no ; then
302 AC_PROG_YACC
303 fi
304
305
306 #--------------------------------------------------------------------
307 # Set LEX.
308 # ASCEND requires a `flex' which understands -P (allows you to
309 # specify a prefix other than `yy'). The -P flag was added at
310 # the same time a -V (version) flag was added (version 2.4.1),
311 # so if `flex' understands -V, it'll understand -P (checking
312 # for -P directly requires a flex input file).
313 #
314 # 1. If `LEX' is not set, look for `flex' and set `LEX' to
315 # `flex' if found.
316 # 2. If `flex' was found, see if it understands -V. If so,
317 # set `scanner_src' and `typer_src' to have `flex' generate
318 # the C files from the flex input files
319 # ascend4/compiler/scanner.l & ascend4/interface/typelex.l
320 # We don't need to look for libfl.a since we define
321 # yywrap() ourselves.
322 # 3. If `flex' wasn't found or was found but isn't new enough:
323 # a. Print a warning message
324 # b. Set `scanner_src' and `typer_src' to use pre-generated
325 # C files for the flex files mentioned in (2).
326 # c. Set `LEX' to `lex'
327 # d. Search for the lex library `libl.a' and set LEXLIB to
328 # its location.
329 #--------------------------------------------------------------------
330 AC_CHECK_PROG(LEX, flex, flex)
331
332 if test -n "$LEX" ; then
333 AC_MSG_CHECKING([whether $LEX is at least version 2.4.1])
334 echo "$LEX -V" 1>&5
335 if $LEX -V 1>&5 2>&5 ; then
336 AC_MSG_RESULT(yes)
337 scanner_src="scanner.c.from.flex"
338 typer_src="typelex.c.from.flex"
339 else
340 AC_MSG_RESULT(no)
341 LEX=''
342 fi
343 fi
344
345 if test -z "$LEX" ; then
346 AC_MSG_WARN([Cannot find a flex lexer version 2.4.1 or greater.
347 Using pregenerated C files for ascend4/compiler/scanner.l
348 and ascend4/interface/typelex.l. If you have flex 2.4.1
349 or newer, set the LEX environment variable to its location
350 and run configure again.])
351 scanner_src="scanner.c.from.c"
352 typer_src="typelex.c.from.c"
353
354 # let configure set LEX and LEXLIB even though we won't be using them
355 AC_PROG_LEX
356 fi
357
358
359 #--------------------------------------------------------------------
360 # Math libraries.
361 # On a few very rare systems, all of the libm.a stuff is
362 # already in libc.a. Set compiler flags accordingly.
363 # Also, Linux requires the "ieee" library for math to work
364 # right (and it must appear before "-lm").
365 #
366 # When building on HPUX with GCC, GCC cannot find `copysign'
367 # because it lives in an odd place; see if we need to add
368 # this odd place to MATH_LIBS.
369 #
370 # See if erf(), the error function, exists; if so, define
371 # HAVE_ERF.
372 #--------------------------------------------------------------------
373 AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm")
374
375 AC_CHECK_LIB(ieee, printf, [MATH_LIBS="-lieee $MATH_LIBS"])
376
377 if test -n "$MATH_LIBS" ; then
378 AC_CHECK_LIB(m, copysign, ,
379 AC_CHECK_LIB(m, drem, [MATH_LIBS="$MATH_LIBS /lib/pa1.1/libM.a"]
380 , , /lib/pa1.1/libM.a
381 ),
382 $MATH_LIBS)
383 fi
384
385 # store the current list of libraries, add the math libraries to LIBS,
386 # check for erf(), then reset the value of LIBS.
387 asc_keep_LIBS="$LIBS"
388 LIBS="$LIBS $MATH_LIBS"
389 AC_CHECK_FUNCS(erf)
390 LIBS="$asc_keep_LIBS"
391
392
393 #--------------------------------------------------------------------
394 # Check for X11.
395 # We'll use the simple autoconf builtin macro for finding
396 # X11 until we find a reason not to.
397 #
398 # On Solaris and IRIX, add the path to the X library to the
399 # run-time shared-library-search-path so the ASCEND binary
400 # can find the X library without the user having to set
401 # LD_LIBRARY_PATH
402 #--------------------------------------------------------------------
403 AC_PATH_X
404 if test -n "$x_includes"; then
405 X11_INCLUDES="-I$x_includes"
406 fi
407 if test -n "$x_libraries"; then
408 X11_LIBRARIES="-L$x_libraries"
409 case "$host" in
410 sparc-sun-solaris*)
411 X11_RUN_PATH="-R$x_libraries"
412 ;;
413 mips-sgi-irix*)
414 X11_RUN_PATH="-rpath $x_libraries"
415 ;;
416 *)
417 X11_RUN_PATH=""
418 ;;
419 esac
420 fi
421
422
423 #--------------------------------------------------------------------
424 # Check for the existence of various libraries. The order here
425 # is important, so that then end up in the right order in the
426 # command line generated by make. The -lsocket and -lnsl
427 # libraries require a couple of special tricks:
428 # 1. Use "connect" and "accept" to check for -lsocket, and
429 # "gethostbyname" to check for -lnsl.
430 # 2. Use each function name only once: can't redo a check
431 # because autoconf caches the results of the last check
432 # and won't redo it.
433 # 3. Use -lnsl and -lsocket only if they supply procedures that
434 # aren't already present in the normal libraries. This is
435 # because IRIX 5.2 has libraries, but they aren't needed and
436 # they're bogus: they goof up name resolution if used.
437 # 4. On some SVR4 systems, can't use -lsocket without -lnsl
438 # too. To get around this problem, check for both libraries
439 # together if -lsocket doesn't work by itself.
440 #--------------------------------------------------------------------
441 dnl AC_CHECK_LIB(Xbsd, printf, [LIBS="$LIBS -lXbsd"])
442
443 asc_checkBoth=0
444 AC_CHECK_FUNC(connect, [asc_checkSocket=0], [asc_checkSocket=1])
445 if test "$asc_checkSocket" = 1; then
446 AC_CHECK_LIB(socket, printf, [X11_EXTRA_LIBS="-lsocket"],[asc_checkBoth=1])
447 fi
448 if test "$asc_checkBoth" = 1; then
449 asc_oldLibs=$LIBS
450 X11_EXTRA_LIBS="-lsocket -lnsl"
451 LIBS="$LIBS $X11_EXTRA_LIBS"
452 AC_CHECK_FUNC(accept, asc_checkNsl=0, [X11_EXTRA_LIBS=""])
453 LIBS=$asc_oldLibs
454 fi
455 asc_oldLibs=$LIBS
456 LIBS="$LIBS $X11_EXTRA_LIBS"
457 AC_CHECK_FUNC(gethostbyname, ,
458 AC_CHECK_LIB(nsl, printf, [X11_EXTRA_LIBS="$X11_EXTRA_LIBS -lnsl"]))
459 LIBS=$asc_oldLibs
460
461
462 #--------------------------------------------------------------------
463 # The following comes directly from the configure.in file for
464 # Tcl8.0.
465 #
466 # The statements below define a collection of symbols related to
467 # dynamic loading and shared libraries:
468 #
469 # DL_OBJS - Name of the object file that implements dynamic
470 # loading for ASCEND on this system.
471 # DL_LIBS - Library file(s) to include in tclsh and other base
472 # applications in order for the "load" command to work.
473 # LD_FLAGS - Flags to pass to the compiler when linking object
474 # files into an executable application binary such
475 # as tclsh.
476 # LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib",
477 # that tell the run-time dynamic linker where to look
478 # for shared libraries such as libtcl.so. Depends on
479 # the variable LIB_RUNTIME_DIR in the Makefile.
480 # MAKE_LIB - Command to execute to build the ASCEND library;
481 # differs depending on whether or not ASCEND is being
482 # compiled as a shared library.
483 # SHLIB_CFLAGS - Flags to pass to cc when compiling the components
484 # of a shared library (may request position-independent
485 # code, among other things).
486 # SHLIB_LD - Base command to use for combining object files
487 # into a shared library.
488 # SHLIB_LD_LIBS - Dependent libraries for the linker to scan when
489 # creating shared libraries. This symbol typically
490 # goes at the end of the "ld" commands that build
491 # shared libraries. The value of the symbol is
492 # "${LIBS}" if all of the dependent libraries should
493 # be specified when creating a shared library. If
494 # dependent libraries should not be specified (as on
495 # SunOS 4.x, where they cause the link to fail, or in
496 # general if ASCEND and Tk aren't themselves shared
497 # libraries), then this symbol has an empty string
498 # as its value.
499 # SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable
500 # extensions. An empty string means we don't know how
501 # to use shared libraries on this platform.
502 # ASC_LIB_FILE - Name of the file that contains the ASCEND library, such
503 # as libtcl7.8.so or libtcl7.8.a.
504 # ASC_LIB_SUFFIX -Specifies everything that comes after the "libtcl"
505 # in the shared library name, using the $VERSION variable
506 # to put the version in the right place. This is used
507 # by platforms that need non-standard library names.
508 # Examples: ${VERSION}.so.1.1 on NetBSD, since it needs
509 # to have a version after the .so, and ${VERSION}.a
510 # on AIX, since the ASCEND shared library needs to have
511 # a .a extension whereas shared objects for loadable
512 # extensions have a .so extension. Defaults to
513 # ${VERSION}${SHLIB_SUFFIX}.
514 #--------------------------------------------------------------------
515
516 # Step 1: set the variable "system" to hold the name and version number
517 # for the system. This can usually be done via the "uname" command, but
518 # there are a few systems, like Next, where this doesn't work.
519
520 # Changed this to use the "$host" variable from AC_CANONICAL_HOST
521
522 # Step 2: check for existence of -ldl library. This is needed because
523 # Linux can use either -ldl or -ldld for dynamic loading.
524
525 AC_CHECK_LIB(dl, dlopen, have_dl=yes, have_dl=no)
526
527 # Step 3: set configuration options based on system name and version.
528
529 ASC_SHARED_LIB_SUFFIX=""
530 ASC_UNSHARED_LIB_SUFFIX=""
531 ASC_LIB_VERSIONS_OK=ok
532 case $host in
533 *-aix*)
534 SHLIB_CFLAGS=""
535 SHLIB_LD="$fullpathsrcdir/ldAix /bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512"
536 SHLIB_LD_LIBS='${LIBS}'
537 SHLIB_SUFFIX=".so"
538 DL_OBJS=""
539 DL_LIBS="-lld"
540 LD_FLAGS=""
541 LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
542 ASC_SHARED_LIB_SUFFIX='${VERSION}.a'
543 ;;
544 *-bsdi*)
545 SHLIB_CFLAGS=""
546 SHLIB_LD="shlicc -r"
547 SHLIB_LD_LIBS='${LIBS}'
548 SHLIB_SUFFIX=".so"
549 DL_OBJS=""
550 DL_LIBS="-ldl"
551 LD_FLAGS=""
552 LD_SEARCH_FLAGS=""
553 ;;
554 *-dgux*)
555 SHLIB_CFLAGS="-K PIC"
556 SHLIB_LD="cc -G"
557 SHLIB_LD_LIBS=""
558 SHLIB_SUFFIX=".so"
559 DL_OBJS=""
560 DL_LIBS="-ldl"
561 LD_FLAGS=""
562 LD_SEARCH_FLAGS=""
563 ;;
564 *-hpux8*|*-hpux9*|*-hpux10*)
565 AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no)
566 if test "$tcl_ok" = yes; then
567 SHLIB_CFLAGS="+z"
568 SHLIB_LD="ld -b"
569 SHLIB_LD_LIBS=""
570 SHLIB_SUFFIX=".sl"
571 DL_OBJS=""
572 DL_LIBS="-ldld"
573 LD_FLAGS="-Wl,-E"
574 LD_SEARCH_FLAGS='-Wl,+b,${LIB_RUNTIME_DIR}:.'
575 fi
576 ;;
577 *-irix4*)
578 SHLIB_CFLAGS="-G 0"
579 SHLIB_SUFFIX=".a"
580 SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0"
581 SHLIB_LD_LIBS='${LIBS}'
582 DL_OBJS=""
583 DL_LIBS=""
584 LD_FLAGS="-Wl,-D,08000000"
585 LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
586 ASC_SHARED_LIB_SUFFIX='${VERSION}.a'
587 ;;
588 *-irix5*|*-irix6.*)
589 SHLIB_CFLAGS=""
590 SHLIB_LD="ld -shared -rdata_shared"
591 SHLIB_LD_LIBS=""
592 SHLIB_SUFFIX=".so"
593 DL_OBJS=""
594 DL_LIBS=""
595 LD_FLAGS=""
596 LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
597 ;;
598 *-linux*)
599 SHLIB_CFLAGS="-fPIC"
600 SHLIB_LD_LIBS=""
601 SHLIB_SUFFIX=".so"
602 if test "$have_dl" = yes; then
603 SHLIB_LD="${CC} -shared"
604 DL_OBJS=""
605 DL_LIBS="-ldl"
606 LD_FLAGS="-rdynamic"
607 LD_SEARCH_FLAGS=""
608 else
609 AC_CHECK_HEADER(dld.h, [
610 SHLIB_LD="ld -shared"
611 DL_OBJS=""
612 DL_LIBS="-ldld"
613 LD_FLAGS=""
614 LD_SEARCH_FLAGS=""])
615 fi
616 ;;
617 MP-RAS-02*)
618 SHLIB_CFLAGS="-K PIC"
619 SHLIB_LD="cc -G"
620 SHLIB_LD_LIBS=""
621 SHLIB_SUFFIX=".so"
622 DL_OBJS=""
623 DL_LIBS="-ldl"
624 LD_FLAGS=""
625 LD_SEARCH_FLAGS=""
626 ;;
627 MP-RAS-*)
628 SHLIB_CFLAGS="-K PIC"
629 SHLIB_LD="cc -G"
630 SHLIB_LD_LIBS=""
631 SHLIB_SUFFIX=".so"
632 DL_OBJS=""
633 DL_LIBS="-ldl"
634 LD_FLAGS="-Wl,-Bexport"
635 LD_SEARCH_FLAGS=""
636 ;;
637 *-netbsd*|*-freebsd*|*-openbsd*)
638 # Not available on all versions: check for include file.
639 AC_CHECK_HEADER(dlfcn.h, [
640 SHLIB_CFLAGS="-fpic"
641 SHLIB_LD="ld -Bshareable -x"
642 SHLIB_LD_LIBS=""
643 SHLIB_SUFFIX=".so"
644 DL_OBJS=""
645 DL_LIBS=""
646 LD_FLAGS=""
647 LD_SEARCH_FLAGS=""
648 ASC_SHARED_LIB_SUFFIX='`echo ${VERSION} | tr -d .`.so.1.0'
649 ], [
650 SHLIB_CFLAGS=""
651 SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r"
652 SHLIB_LD_LIBS='${LIBS}'
653 SHLIB_SUFFIX=".a"
654 DL_OBJS=""
655 DL_LIBS=""
656 LD_FLAGS=""
657 LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
658 ASC_SHARED_LIB_SUFFIX='`echo ${VERSION} | tr -d .`.a'
659 ])
660
661 # FreeBSD doesn't handle version numbers with dots.
662
663 ASC_UNSHARED_LIB_SUFFIX='`echo ${VERSION} | tr -d .`.a'
664 ASC_LIB_VERSIONS_OK=nodots
665 ;;
666 *-nextstep*)
667 SHLIB_CFLAGS=""
668 SHLIB_LD="cc -nostdlib -r"
669 SHLIB_LD_LIBS=""
670 SHLIB_SUFFIX=".so"
671 DL_OBJS=""
672 DL_LIBS=""
673 LD_FLAGS=""
674 LD_SEARCH_FLAGS=""
675 ;;
676 alpha-dec-osf*)
677 # Digital OSF/1
678 SHLIB_CFLAGS=""
679 SHLIB_LD='ld -shared -expect_unresolved "*"'
680 SHLIB_LD_LIBS=""
681 SHLIB_SUFFIX=".so"
682 DL_OBJS=""
683 DL_LIBS=""
684 LD_FLAGS=""
685 LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
686 ;;
687 *-riscos*)
688 SHLIB_CFLAGS="-G 0"
689 SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0"
690 SHLIB_LD_LIBS='${LIBS}'
691 SHLIB_SUFFIX=".a"
692 DL_OBJS=""
693 DL_LIBS=""
694 LD_FLAGS="-Wl,-D,08000000"
695 LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
696 ;;
697 SCO_SV-3.2*)
698 # Note, dlopen is available only on SCO 3.2.5 and greater. However,
699 # this test works, since "uname -s" was non-standard in 3.2.4 and
700 # below.
701 SHLIB_CFLAGS="-Kpic -belf"
702 SHLIB_LD="ld -G"
703 SHLIB_LD_LIBS=""
704 SHLIB_SUFFIX=".so"
705 DL_OBJS=""
706 DL_LIBS=""
707 LD_FLAGS="-belf -Wl,-Bexport"
708 LD_SEARCH_FLAGS=""
709 ;;
710 *-sni-sysv*)
711 SHLIB_CFLAGS="-K PIC"
712 SHLIB_LD="cc -G"
713 SHLIB_LD_LIBS=""
714 SHLIB_SUFFIX=".so"
715 DL_OBJS=""
716 DL_LIBS="-ldl"
717 LD_FLAGS=""
718 LD_SEARCH_FLAGS=""
719 ;;
720 *-sunos4*)
721 SHLIB_CFLAGS="-PIC"
722 SHLIB_LD="ld"
723 SHLIB_LD_LIBS=""
724 SHLIB_SUFFIX=".so"
725 DL_OBJS=""
726 DL_LIBS="-ldl"
727 LD_FLAGS=""
728 LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
729
730 # SunOS can't handle version numbers with dots in them in library
731 # specs, like -ltcl7.5, so use -ltcl75 instead. Also, it
732 # requires an extra version number at the end of .so file names.
733 # So, the library has to have a name like libtcl75.so.1.0
734
735 ASC_SHARED_LIB_SUFFIX='`echo ${VERSION} | tr -d .`.so.1.0'
736 ASC_UNSHARED_LIB_SUFFIX='`echo ${VERSION} | tr -d .`.a'
737 ASC_LIB_VERSIONS_OK=nodots
738 ;;
739 *-solaris*)
740 SHLIB_CFLAGS="-KPIC"
741 SHLIB_LD="/usr/ccs/bin/ld -G -z text"
742
743 # Note: need the LIBS below, otherwise Tk won't find ASCEND's
744 # symbols when dynamically loaded into tclsh.
745
746 SHLIB_LD_LIBS='${LIBS}'
747 SHLIB_SUFFIX=".so"
748 DL_OBJS=""
749 DL_LIBS="-ldl"
750 LD_FLAGS=""
751 LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
752 ;;
753 *-ultrix4*)
754 SHLIB_CFLAGS="-G 0"
755 SHLIB_SUFFIX=".a"
756 SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0"
757 SHLIB_LD_LIBS='${LIBS}'
758 DL_OBJS=""
759 DL_LIBS=""
760 LD_FLAGS="-Wl,-D,08000000"
761 LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
762 ;;
763 mips-dde-sysv*)
764 SHLIB_CFLAGS="-KPIC"
765 SHLIB_LD="cc -G"
766 SHLIB_LD_LIBS=""
767 SHLIB_SUFFIX=".so"
768 DL_OBJS=""
769 DL_LIBS="-ldl"
770 # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers
771 # that don't grok the -Bexport option. Test that it does.
772 hold_ldflags=$LDFLAGS
773 AC_MSG_CHECKING([for ld accepts -Bexport flag])
774 LDFLAGS="${LDFLAGS} -Wl,-Bexport"
775 AC_TRY_LINK(, [int i;], found=yes, found=no)
776 LDFLAGS=$hold_ldflags
777 AC_MSG_RESULT($found)
778 if test "$found" = yes; then
779 LD_FLAGS="-Wl,-Bexport"
780 else
781 LD_FLAGS=""
782 fi
783 LD_SEARCH_FLAGS=""
784 ;;
785 esac
786
787 #--------------------------------------------------------------------
788 # TCL / TK / TK-TABLE
789 #
790 # The user can specify the location of the Tcl and/or Tk
791 # libraries using the --with-tcl and --with-tk configure
792 # options. Print a warning if the user tries to say
793 # --without-tcl since ASCEND requires Tcl/Tk.
794 #
795 # If the user does not specify the location, we need to search
796 # for either shared or static versions of the Tcl and Tk
797 # libraries, and they must be for version 8.x of Tcl/Tk.
798 #
799 # Check for the static Tcl library in a list of reasonable
800 # locations. If we find it, verify that it is from Tcl 8.0 by
801 # looking for the symbol `TclCompileCatchCmd'. Remember, we
802 # need the math library and the dynamic loader library (-ldl or
803 # -ldld) to avoid undefined symbols when we test the version of
804 # the Tcl library.
805 #
806 # If we can't find a static Tcl8.0 library, try to find a
807 # dynamic one by calling AC_CHECK_LIB and looking for the
808 # function `TclCompileCatchCmd'. If we fail, print an error
809 # message and exit configure.
810 #
811 # Search for a version of tcl.h that contains `8.' in the
812 # TCL_MAJOR_VERSION macro; we look in a list of reasonable
813 # locations, then call AC_EGREP_HEADER to look for us.
814 #
815 # Repeat the process for the Tk library; the symbol we want is
816 # `Tk_NameOfFont'; remember we need the X library---and all the
817 # libraries it needs---as well as the Tcl library to avoid
818 # undefined symbols when we test the version of the Tk library.
819 #
820 # The user can use --with-tktable to specify a location for a
821 # static version of the Tk-Table library. If a value is
822 # specified, assume it is good and define the cpp macro
823 # STATIC_TABLE.
824 #
825 # If a value is not specified, look for libTktable.a; if we
826 # find it, assume it works and define the cpp macro
827 # STATIC_TABLE. If we don't find it, assume ASCEND will be
828 # able to dynamically load it at run time and tell the user
829 # about our assumption.
830 #--------------------------------------------------------------------
831 #
832 # a list of directories to search for the Tcl/Tk libraries
833 asc_tcl_library_dirs="
834 /usr/local/lib/ascend/lib
835 $prefix/lib:$exec_prefix/lib
836 $ascpwd/tcl8.0
837 $ascpwd/tcl8.0/unix
838 $ascpwd/tk8.0
839 $ascpwd/tk8.0/unix
840 $ascpwd/ascend4/lib
841 /lib
842 /usr/lib
843 /usr/local/lib
844 /usr/contributed/lib
845 /afs/cs/project/ascend/depot/@sys/lib
846 "
847 # a list of directories to search for the Tcl/Tk include files
848 asc_tcl_include_dirs="
849 /usr/local/lib/ascend/include
850 $prefix/include
851 $fullpathsrcdir/tcl8.0
852 $fullpathsrcdir/tcl8.0/generic
853 $fullpathsrcdir/tk8.0
854 $fullpathsrcdir/tk8.0/generic
855 $fullpathsrcdir/ascend4/include
856 $ascpwd/ascend4/include
857 /usr/include
858 /usr/local/include
859 /usr/contributed/include
860 /afs/cs/project/ascend/depot/common/include
861 "
862 # a list of directories to search for the TkTable library
863 asc_tk_table_dirs="
864 /usr/local/lib/ascend/lib/Tktable
865 $prefix/lib/Tktable
866 $exec_prefix/lib/Tktable
867 $ascpwd/tkTable1.80
868 $ascpwd/ascend4/lib
869 $ascpwd/ascend4/lib/Tktable
870 /afs/cs/project/ascend/depot/@sys/lib/Tktable
871 "
872 # see if the user gave us the location of the Tcl8.0
873 # library and/or header file
874 #
875 AC_ARG_WITH(tcl,
876 [Location of Tcl, Tk, and tkTable:
877 --with-tcl=LIBRARY,HEADER
878 The location of the Tcl8.0 library and/or header
879 For a static Tcl8.0 library, give the full path:
880 --with-tcl='/usr/local/lib/libtcl8.0.a'
881 For a dynamic library, give any -L options required:
882 --with-tcl='-L/usr/local/lib -ltcl8.0'
883 To specify only the header, leave off the library:
884 --with-tcl=',/usr/local/include/tcl.h'] ,
885 , [with_tcl=yes])
886
887 case "$with_tcl" in
888 no)
889 # User specified --without-tcl; this makes no sense,
890 # print a warning and search for it ourselves
891 AC_MSG_WARN([Bad option '--without-tcl'
892 ASCEND must be compiled with Tcl8.0.])
893 with_tcllib=_searching
894 with_tclhdr=_searching
895 ;;
896 yes|,|"")
897 # User didn't give the option or didn't give useful
898 # information, search for it ourselves
899 with_tcllib=_searching
900 with_tclhdr=_searching
901 ;;
902 ,*)
903 # Only the header was specified.
904 with_tcllib=_searching
905 TCL_HDR=`echo $with_tcl | sed 's/^,//'`
906 ;;
907 *,?*)
908 # Both the library and the header were specified
909 TCL_LIB=`echo $with_tcl | sed 's/,.*$//'`
910 TCL_HDR=`echo $with_tcl | sed 's/^.*,//'`
911 ;;
912 *)
913 # Only the library was specified
914 TCL_LIB=`echo $with_tcl | sed 's/,$//'`
915 with_tclhdr=_searching
916 ;;
917 esac
918
919 # try to find a static version of the Tcl8.0 library
920 #
921 if test "X$with_tcllib" = X_searching ; then
922 AC_PATH_PROGS(TCL_LIB, libtcl8.0.a libtcl80.a libtcl8.3.a, , $asc_tcl_library_dirs)
923 if test -z "$TCL_LIB" ; then
924 TCL_LIB=_searching
925 fi
926 else
927 AC_MSG_RESULT([checking for tcl library... $TCL_LIB])
928 fi
929
930 # verify the TCL_LIB
931 if test ! "X$TCL_LIB" = X_searching ; then
932 AC_MSG_CHECKING([whether $TCL_LIB is for Tcl8.3])
933 asc_libs_orig=$LIBS
934 LIBS="$TCL_LIB $X11_LIBRARIES $X11_EXTRA_LIBS $DL_LIBS $MATH_LIBS $LIBS"
935 AC_TRY_LINK( , [TclCompileCatchCmd()], , [TCL_LIB=_searching]);
936 if test "X$TCL_LIB" = X_searching ; then
937 AC_MSG_RESULT(no)
938 else
939 AC_MSG_RESULT(yes)
940 fi
941 LIBS=$asc_libs_orig
942 fi
943
944 # see if the default LPATH can find the Tcl8.0 library
945 #
946 if test "X$TCL_LIB" = X_searching ; then
947 AC_CHECK_LIB(tcl83, TclCompileCatchCmd, [TCL_LIB="-ltcl83"] , ,
948 [$X11_LIBRARIES $X11_EXTRA_LIBS $DL_LIBS $MATH_LIBS])
949 fi
950 if test "X$TCL_LIB" = X_searching ; then
951 AC_CHECK_LIB(tcl8.3, TclCompileCatchCmd, [TCL_LIB="-ltcl8.3"] , ,
952 [$X11_LIBRARIES $X11_EXTRA_LIBS $DL_LIBS $MATH_LIBS])
953 fi
954 if test "X$TCL_LIB" = X_searching ; then
955 AC_CHECK_LIB(tcl8.0, TclCompileCatchCmd, [TCL_LIB="-ltcl8.0"] , ,
956 [$X11_LIBRARIES $X11_EXTRA_LIBS $DL_LIBS $MATH_LIBS])
957 fi
958 if test "X$TCL_LIB" = X_searching ; then
959 AC_CHECK_LIB(tcl80, TclCompileCatchCmd, [TCL_LIB="-ltcl80"] , ,
960 [$X11_LIBRARIES $X11_EXTRA_LIBS $DL_LIBS $MATH_LIBS])
961 fi
962 if test "X$TCL_LIB" = X_searching ; then
963 AC_CHECK_LIB(tcl, TclCompileCatchCmd, [TCL_LIB="-ltcl"] , ,
964 [$X11_LIBRARIES $X11_EXTRA_LIBS $DL_LIBS $MATH_LIBS])
965 fi
966
967 # give up searching for the Tcl8.0 library
968 #
969 if test "X$TCL_LIB" = X_searching ; then
970 AC_MSG_ERROR([Cannot find a compatiable Tcl library.
971 You must build and install Tcl version 8.3 before you
972 can build ASCEND. If you have installed the correct version
973 of Tcl, run configure again with the argument:
974 --with-tcl=LIBRARY,HEADER
975 where LIBRARY and HEADER are the full paths to the Tcl8.3
976 library file and header file, respectively.])
977 fi
978
979 # see if the user gave us the location of the Tcl8.0 header file
980 #
981 if test ! "X$with_tclhdr" = X_searching ; then
982 if test ! -f "$TCL_HDR" ; then
983 AC_MSG_WARN([user specified Tcl header file, $TCL_HDR, does not exist])
984 with_tclhdr=_searching
985 TCL_HDR=''
986 fi
987 fi
988 if test "X$with_tclhdr" = X_searching ; then
989 AC_PATH_PROG(TCL_HDR, tcl.h, , $asc_tcl_include_dirs)
990 if test -z "$TCL_HDR" ; then
991 AC_EGREP_HEADER([TCL_MAJOR_VERSION.*8], tcl.h, [TCL_HDR='tcl.h'], )
992 fi
993 else
994 AC_MSG_RESULT([checking for tcl header... $TCL_HDR])
995 fi
996 if test -f "$TCL_HDR" ; then
997 AC_MSG_CHECKING([whether $TCL_HDR is for version 8])
998 echo 'grep TCL_MAJOR_VERSION "$TCL_HDR" 2>&5' 1>&5
999 grep_tcl_h=`grep TCL_MAJOR_VERSION "$TCL_HDR" 2>&5`
1000 echo $grep_tcl_h 1>&5
1001 case "$grep_tcl_h" in
1002 *8)
1003 AC_MSG_RESULT(yes)
1004 ;;
1005 *)
1006 AC_MSG_RESULT(no)
1007 TCL_HDR=
1008 ;;
1009 esac
1010 fi
1011 if test -z "$TCL_HDR" ; then
1012 AC_MSG_ERROR([Cannot find a compatiable Tcl header file.
1013 You must build and install Tcl version 8.3 (but not yet 8.4) before you
1014 can build ASCEND. If you have installed the correct version
1015 of Tcl, run configure again with the argument:
1016 --with-tcl=LIBRARY,HEADER
1017 where LIBRARY and HEADER are the full paths to the Tcl8.3
1018 library file and header file, respectively.])
1019 fi
1020 TCL_HDR=`echo $TCL_HDR | sed 's,tcl\.h$,,'`
1021 if test -n "$TCL_HDR" ; then
1022 TCL_HDR="-I$TCL_HDR"
1023 fi
1024
1025
1026 ###### REPEAT FOR TK
1027 #
1028 # see if the user gave us the location of the Tk8.3
1029 # library and/or header file
1030 #
1031 AC_ARG_WITH(tk,
1032 [ --with-tk=LIBRARY,HEADER
1033 The location of the Tk8.0 library and/or header
1034 For a static Tk8.0 library, give the full path:
1035 --with-tk='/usr/local/lib/libtk8.3.a'
1036 For a dynamic library, give any -L options required:
1037 --with-tk='-L/usr/local/lib -ltk8.3'
1038 To specify only the header, leave off the library:
1039 --with-tk=',/usr/local/include/tk.h'] ,
1040 , [with_tk=yes])
1041
1042 case "$with_tk" in
1043 no)
1044 # User specified --without-tk; this makes no sense,
1045 # print a warning and search for it ourselves
1046 AC_MSG_WARN([Bad option '--without-tk'
1047 ASCEND must be compiled with Tk8.0.])
1048 with_tklib=_searching
1049 with_tkhdr=_searching
1050 ;;
1051 yes|,|"")
1052 # User didn't give the option or didn't give useful
1053 # information, search for it ourselves
1054 with_tklib=_searching
1055 with_tkhdr=_searching
1056 ;;
1057 ,*)
1058 # Only the header was specified.
1059 with_tklib=_searching
1060 TK_HDR=`echo $with_tk | sed 's/^,//'`
1061 ;;
1062 *,?*)
1063 # Both the library and the header were specified
1064 TK_LIB=`echo $with_tk | sed 's/,.*$//'`
1065 TK_HDR=`echo $with_tk | sed 's/^.*,//'`
1066 ;;
1067 *)
1068 # Only the library was specified
1069 TK_LIB=`echo $with_tk | sed 's/,$//'`
1070 with_tkhdr=_searching
1071 ;;
1072 esac
1073
1074 # try to find a static version of the Tk8.0 library
1075 #
1076 if test "X$with_tklib" = X_searching ; then
1077 AC_PATH_PROGS(TK_LIB, libtk8.0.a libtk80.a libtk.a libtk8.3.a, , $asc_tcl_library_dirs)
1078 if test -z "TK_LIB" ; then
1079 TK_LIB=_searching
1080 fi
1081 else
1082 AC_MSG_RESULT([checking for tk library... $TK_LIB])
1083 fi
1084
1085 # verify the TK_LIB
1086 #
1087 if test ! "X$TK_LIB" = X_searching ; then
1088 AC_MSG_CHECKING([whether $TK_LIB is for Tk8.0])
1089 asc_libs_orig=$LIBS
1090 LIBS="$TK_LIB $TCL_LIB $X11_LIBRARIES -lX11 $X11_EXTRA_LIBS $DL_LIBS $MATH_LIBS $LIBS"
1091 AC_TRY_LINK( , [Tk_NameOfFont()], , [TK_LIB=_searching]);
1092 if test "X$TK_LIB" = X_searching ; then
1093 AC_MSG_RESULT(no)
1094 else
1095 AC_MSG_RESULT(yes)
1096 fi
1097 LIBS=$asc_libs_orig
1098 fi
1099
1100 # see if the default LPATH can find the Tk8.0 library
1101 #
1102 if test "X$TK_LIB" = X_searching ; then
1103 AC_MSG_RESULT([checking for a dynamically loaded Tk8.0 library])
1104 AC_CHECK_LIB(tk8.0, Tk_NameOfFont, [TK_LIB="-ltk8.0"] , ,
1105 [$TCL_LIB $X11_LIBRARIES -lX11 $X11_EXTRA_LIBS $DL_LIBS $MATH_LIBS])
1106 fi
1107 if test "X$TK_LIB" = X_searching ; then
1108 AC_CHECK_LIB(tk80, Tk_NameOfFont, [TK_LIB="-ltk80"] , ,
1109 [$TCL_LIB $X11_LIBRARIES -lX11 $X11_EXTRA_LIBS $DL_LIBS $MATH_LIBS])
1110 fi
1111 if test "X$TK_LIB" = X_searching ; then
1112 AC_CHECK_LIB(tk, Tk_NameOfFont, [TK_LIB="-ltk"] , ,
1113 [$TCL_LIB $X11_LIBRARIES -lX11 $X11_EXTRA_LIBS $DL_LIBS $MATH_LIBS])
1114 fi
1115
1116 # give up searching for the Tk8.0 library
1117 #
1118 if test "X$TK_LIB" = X_searching ; then
1119 AC_MSG_ERROR([Cannot find a compatiable Tk library.
1120 You must build and install Tk version 8.0 or newer before you
1121 can build ASCEND. If you have installed the correct version
1122 of Tk, run configure again with the argument:
1123 --with-tk=LIBRARY,HEADER
1124 where LIBRARY and HEADER are the full paths to the Tk8.0
1125 library file and header file, respectively.])
1126 fi
1127
1128 # see if the user gave us the location of the Tk8.0 header file
1129 #
1130 if test ! "X$with_tkhdr" = X_searching ; then
1131 if test ! -f "$TK_HDR" ; then
1132 AC_MSG_WARN([user specified Tk header file, $TK_HDR, does not exist])
1133 with_tkhdr=_searching
1134 TK_HDR=''
1135 fi
1136 fi
1137 if test "X$with_tkhdr" = X_searching ; then
1138 AC_PATH_PROG(TK_HDR, tk.h, , $asc_tcl_include_dirs)
1139 if test -z "$TK_HDR" ; then
1140 AC_EGREP_HEADER([TK_MAJOR_VERSION.*8], tk.h, [TK_HDR='tk.h'], )
1141 fi
1142 else
1143 AC_MSG_RESULT([checking for tk header... $TK_HDR])
1144 fi
1145 if test -f "$TK_HDR" ; then
1146 AC_MSG_CHECKING([whether $TK_HDR is for version 8])
1147 echo 'grep TK_MAJOR_VERSION "$TK_HDR" 2>&5' 1>&5
1148 grep_tk_h=`grep TK_MAJOR_VERSION "$TK_HDR" 2>&5`
1149 echo $grep_tk_h 1>&5
1150 case "$grep_tk_h" in
1151 *8)
1152 AC_MSG_RESULT(yes)
1153 ;;
1154 *)
1155 AC_MSG_RESULT(no)
1156 TK_HDR=
1157 ;;
1158 esac
1159 fi
1160 if test -z "$TK_HDR" ; then
1161 AC_MSG_ERROR([Cannot find a compatiable Tk header file.
1162 You must build and install Tk version 8.0 or newer before you
1163 can build ASCEND. If you have installed the correct version
1164 of Tk, run configure again with the argument:
1165 --with-tk=LIBRARY,HEADER
1166 where LIBRARY and HEADER are the full paths to the Tk8.0
1167 library file and header file, respectively.])
1168 fi
1169 TK_HDR=`echo $TK_HDR | sed 's,tk\.h$,,'`
1170 if test -n "$TK_HDR" ; then
1171 TK_HDR="-I$TK_HDR"
1172 if test "X$TCL_HDR" = "X$TK_HDR" ; then
1173 TK_HDR=
1174 fi
1175 fi
1176
1177
1178 AC_ARG_WITH(tktable,
1179 [ --with-tktable=TKTABLE full path to a TkTable1.3 static library], , )
1180 case "$with_tktable" in
1181 yes|no|"")
1182 # search for the table
1183 AC_PATH_PROG(TKTABLE_LIB, libTktable.a, , $asc_tk_table_dirs)
1184 ;;
1185 *)
1186 # use the user's value
1187 TKTABLE_LIB="$with_tktable"
1188 ;;
1189 esac
1190 if test -n "$TKTABLE_LIB" ; then
1191 HAVE_TKTABLE='-DSTATIC_TKTABLE'
1192 else
1193 AC_MSG_RESULT(Assuming Tktable will be dynamically linked into ASCEND)
1194 fi
1195
1196 AC_ARG_WITH(wish,
1197 [ --with-wish=/path/to/bin/wish
1198 The location of the wish shell executable matching
1199 the tcl/tk given by --with-tk and --with-tcl.
1200 X11 must be running during configure. ] ,
1201 , [with_wish=no])
1202 case "$with_wish" in
1203 yes|no|"")
1204 AC_MSG_RESULT([--with-wish not specified.
1205 Setting env vars TCL_LIBRARY, TK_LIBRARY may be needed to run.])
1206 ;;
1207 *)
1208 AC_MSG_CHECKING([wish for tcl_library,tklibrary])
1209 ASC_TK_LIBRARY=`config/wishvar tk_library $with_wish`
1210 ASC_TCL_LIBRARY=`config/wishvar tcl_library $with_wish`
1211 AC_MSG_RESULT([ $ASC_TCL_LIBRARY , $ASC_TK_LIBRARY])
1212 ;;
1213 esac
1214
1215
1216 #--------------------------------------------------------------------
1217 # FORTRAN
1218 #
1219 # ASCEND uses the LSOD integrator and is capable of working
1220 # with CONOPT and with MINOS. These libraries are written in
1221 # Fortran; to use them, configure needs to find a Fortran
1222 # compiler and the necessary Fortran libraries (e.g.,
1223 # libF77.a). LSOD, CONOPT, and MINOS also require the BLAS and
1224 # LINPACK libraries to avoid undefined symbols at link time.
1225 #
1226 # The builder can specify the location of
1227 # * the Fortran compiler and libraries using
1228 # --with-fortran=<compiler>,<libraries>
1229 # * the BLAS library using
1230 # --with-blas=<blas-library>
1231 # * the LINPACK library using
1232 # --with-linpack=<linpack-library>
1233 # * the LSOD library using
1234 # --with-blas=<lsod-library>
1235 # * the CONOPT library using
1236 # --with-conopt=<conopt-library>
1237 # * the MINOS library using
1238 # --with-minos=<minos-library> <===currently disabled
1239 # The builder can disable some parts of the fortran build using
1240 # the --without-<package> configure option.
1241 #
1242 # If the user does not specify the locations of the compiler
1243 # and the libraries and does not disable them, configure
1244 # attempts to find them.
1245 #
1246 # Building with LSOD, CONOPT, and/or MINOS is further
1247 # complicated by the dependencies between these libraries and
1248 # the BLAS and LINPACK libraries.
1249 #
1250 # If we cannot find a Fortran compiler, we disable all Fortran
1251 # code (LSOD, CONOPT, and MINOS). Otherwise, look for the
1252 # Fortran libraries (e.g., libF77.a) based on the type of
1253 # machine we are compiling on.
1254 #
1255 # If Fortran is enabled, we need to find a compiled BLAS
1256 # library or source code. Check for the machine's libblas.a
1257 # and ASCEND's libascblas.a; if those fail, check for the
1258 # libascblas.a source code; if that fails, we disable all
1259 # Fortran (LSOD, CONOPT, MINOS).
1260 #
1261 # If Fortran is enabled, we need to find a compiled LINPACK
1262 # library or source code. Check for the machine's liblpak.a
1263 # and ASCEND's libasclpak.a; if those fail, check for the
1264 # libasclpak.a source code; if that fails, we disable all
1265 # Fortran (LSOD, CONOPT, MINOS).
1266 #
1267 # If Fortran is enabled, we try to find a compiled LSOD library
1268 # or source code. Check for a libinteg.a; if that fails, check
1269 # for the libinteg.a source code; if that fails, we disable
1270 # LSOD. If we find LSOD, define STATIC_LSOD.
1271 #
1272 # If Fortran is enabled, we try to find a compiled OPTSQP
1273 # library or source code. Check for a librsqp.a; if that fails,
1274 # check for the librsqp.a source code; if that fails, we disable
1275 # OPTSQP. If we find RSQP, define STATIC_OPTSQP.
1276 #
1277 # If Fortran is enabled, we try to find a compiled CONOPT
1278 # library. Check for a libconsub.a; if that fails, we disable
1279 # CONOPT. If we find CONOPT, define STATIC_CONOPT; if not,
1280 # tell the user where to find CONOPT using the contact
1281 # information from the nonlinear programming FAQ:
1282 # http://www.mcs.anl.gov/home/otc/Guide/faq/nonlinear-programming-faq.html
1283 #
1284 # If Fortran is enabled, we try to find a compiled MINOS
1285 # library or source code. Check for a libminos54.a; if that
1286 # fails, check for the libminos54.a source code; if that fails,
1287 # we disable MINOS. If we find MINOS, define STATIC_MINOS; if
1288 # not, tell the user where to find MINOS using the contact
1289 # information from the nonlinear programming FAQ:
1290 # http://www.mcs.anl.gov/home/otc/Guide/faq/nonlinear-programming-faq.html
1291 #--------------------------------------------------------------------
1292 #
1293 # the list of directories to search for the fortran compiler
1294 asc_f77_prog_dirs="$PATH:/usr/lang:/opt/SUNWspro/bin"
1295 #
1296 # the list of directories to search for the required fortran libraries
1297 asc_f77_support_dirs="
1298 /lib
1299 /usr/lib
1300 /usr/local/lib
1301 /usr/contributed/lib
1302 /usr/local/lib/ascend/lib
1303 $ascpwd/blas
1304 $ascpwd/linpack
1305 $ascpwd/lsod
1306 #AWW20041113: $ascpwd/conopt
1307 #AWW20041113: $ascpwd/rsqp
1308 #AWW20041113: $ascpwd/minos
1309 #AWW20041113: $ascpwd/ascend4/archive
1310 $srcdir/generic/archive
1311 /afs/cs/project/ascend/depot/@sys/lib
1312 /afs/cs/project/ascend/depot/build/obj/conopt
1313 "
1314 #
1315 AC_ARG_WITH(fortran,
1316 [Fortran compiler and libraries:
1317 --with-fortran=F77,F77LIBS
1318 The location of your Fortran compiler and its
1319 library files. For example, under SunOS:
1320 --with-fortran='f77,-L/usr/lang/lib -lF77 -lM77'
1321 To specify only the compiler or libraries, leave off
1322 whatever is not needed:
1323 --with-fortran=',-L/usr/lang/lib -lF77 -lM77'
1324 Use '--without-fortran' to not link against
1325 any Fortran libraries],
1326 , [with_fortran=yes])
1327 case "$with_fortran" in
1328 no)
1329 # The user disabled all fortran using
1330 # the --without-fortran option.
1331 F77=
1332 F77LIBS=
1333 with_f77=no
1334 with_f77libs=no
1335 ;;
1336 yes|,|"")
1337 # The user didn't pass in the --with-fortran option
1338 # or didn't give us any useful information. We do
1339 # the search ourselves.
1340 with_f77=_searching
1341 with_f77libs=_searching
1342 ;;
1343 ,*)
1344 # The user passed in the libraries, search for the
1345 # compiler ourselves.
1346 with_f77=_searching
1347 F77LIBS=`echo $with_fortran | sed 's/^,//'`
1348 echo "user gave F77LIBS=$F77LIBS"
1349 ;;
1350 *,?*)
1351 # The user passed in both the compiler and the
1352 # libraries.
1353 F77=`echo $with_fortran | sed s'/,.*$//'`
1354 F77LIBS=`echo $with_fortran | sed 's/^.*,//'`
1355 echo "user gave F77=$F77"
1356 echo "user gave F77LIBS=$F77LIBS"
1357 ;;
1358 *)
1359 # The user passed in the compiler; search for the
1360 # libraries ourselves.
1361 F77=`echo $with_fortran | sed s'/,$//'`
1362 with_f77libs=_searching
1363 echo "user gave F77=$F77"
1364 ;;
1365 esac
1366
1367 if test "X$with_f77" = X_searching ; then
1368 # Search for the fortran compiler; print a warning if we can't
1369 # find it and disable all fortran.
1370 AC_PATH_PROGS(F77, f77 xlf g77, , $asc_f77_prog_dirs)
1371 if test -z "$F77" ; then
1372 with_fortran=no
1373 with_f77libs=no
1374 AC_MSG_WARN([Cannot find your Fortran compiler. Building ASCEND
1375 without integration, MINOS, and CONOPT support. To bulid ASCEND with
1376 Fortran support, run configure with the option
1377 --with-fortran=F77,F77LIBS
1378 where F77 is the full path to your Fortran compiler and F77LIBS are
1379 its related libraries])
1380 fi
1381 fi
1382
1383 if test "X$with_f77libs" = X_searching ; then
1384 # We found a compiler, now search for the fortran libraries
1385 # based on the system type.
1386 AC_MSG_RESULT([checking for fortran libraries based on system type])
1387 case "$host" in
1388 alpha-dec-osf*)
1389 AC_CHECK_LIB(for, for_lle, [F77LIBS="$F77LIBS -lfor"], , $F77LIBS)
1390 AC_CHECK_LIB(ots, _OtsFill, [F77LIBS="$F77LIBS -lots"], , $F77LIBS)
1391 AC_CHECK_LIB(Ufor, etime_, [F77LIBS="$F77LIBS -lUfor"], , $F77LIBS)
1392 ;;
1393 mips-dec-ultrix*)
1394 AC_CHECK_LIB(for, for_lle, [F77LIBS="$F77LIBS -lfor"], , $F77LIBS)
1395 ;;
1396 hppa1.1-hp-hpux*)
1397 AC_CHECK_LIB(cl, FTN_QATAN, [F77LIBS="$F77LIBS -lcl"], , $F77LIBS)
1398 ;;
1399 *-ibm-aix*)
1400 # need to add -lc before -lxlf on AIX to
1401 # avoid getting the wrong getenv
1402 F77LIBS="-lc $F77LIBS"
1403 AC_CHECK_LIB(xlf, _xldabs, [F77LIBS="$F77LIBS -lxlf"], , $F77LIBS)
1404 AC_CHECK_LIB(xlfutil, srand_, [F77LIBS="$F77LIBS -lxlfutil"], ,
1405 $F77LIBS)
1406 AC_CHECK_LIB(xlf90, printf,
1407 [F77LIBS="$F77LIBS -lxlf90"], , $F77LIBS)
1408 ;;
1409 *-linux-*)
1410 AC_CHECK_LIB(f2c, pow_dd, [F77LIBS="$F77LIBS -lf2c"], , $F77LIBS)
1411 AC_CHECK_LIB(g2c, pow_dd, [F77LIBS="$F77LIBS -lg2c"], , $F77LIBS)
1412 ;;
1413 sparc-sun-solaris*)
1414 if test -n "$GCC" ; then
1415 F77LIBS="-L/opt/SUNWspro/lib -R/opt/SUNWspro/lib"
1416 fi
1417 AC_CHECK_LIB(sunmath, d_sqrt_, [MATH_LIBS="-lsunmath $MATH_LIBS"])
1418 AC_CHECK_LIB(F77, f77_init,
1419 [F77LIBS="$F77LIBS -lF77"], , $F77LIBS $MATH_LIBS)
1420 AC_CHECK_LIB(M77, inmax_,
1421 [F77LIBS="$F77LIBS -lM77"], , $F77LIBS $MATH_LIBS)
1422 ;;
1423 sparc-sun-sunos4*)
1424 if test -n "$GCC" ; then
1425 F77LIBS="-L/usr/lang/lib"
1426 fi
1427 AC_CHECK_LIB(F77, f77_init, [F77LIBS="$F77LIBS -lF77"], , $F77LIBS)
1428 AC_CHECK_LIB(M77, inmax_, [F77LIBS="$F77LIBS -lM77"], , $F77LIBS)
1429 ;;
1430 mips-sgi-irix*)
1431 AC_CHECK_LIB(F77, s_copy, [F77LIBS="$F77LIBS -lF77"], , $F77LIBS)
1432 AC_CHECK_LIB(I77, f_exit, [F77LIBS="$F77LIBS -lI77"], , $F77LIBS)
1433 AC_CHECK_LIB(isam, mkidxname,
1434 [F77LIBS="$F77LIBS -lisam"], , $F77LIBS)
1435 ;;
1436 *)
1437 AC_CHECK_LIB(F77, printf, [F77LIBS="$F77LIBS -lF77"], , $F77LIBS)
1438 AC_CHECK_LIB(M77, printf, [F77LIBS="$F77LIBS -lM77"], , $F77LIBS)
1439 AC_CHECK_LIB(f2c, pow_dd, [F77LIBS="$F77LIBS -lf2c"], , $F77LIBS)
1440 AC_CHECK_LIB(f77, printf, [F77LIBS="$F77LIBS -lf77"], , $F77LIBS)
1441 AC_CHECK_LIB(for, printf, [F77LIBS="$F77LIBS -lfor"], , $F77LIBS)
1442 AC_CHECK_LIB(ots, printf, [F77LIBS="$F77LIBS -lots"], , $F77LIBS)
1443 AC_CHECK_LIB(Ufor, printf, [F77LIBS="$F77LIBS -lUfor"], , $F77LIBS)
1444 ;;
1445 esac
1446 fi
1447
1448 # asc_subdirs are the extra fortran subdirectories we have to visit
1449 # to build the fortran libraries. Initialize it to empty here.
1450 asc_subdirs=''
1451
1452 # Initialize the blas variables
1453 make_blaslib=''
1454
1455 AC_ARG_WITH(blas,
1456 [ --with-blas=BLASLIB The full path to the blas library.
1457 Use '--with-blas=build' to build the blas library
1458 from the sources that come with the distribution.],
1459 , [with_blas=yes] )
1460 case "$with_fortran$with_blas" in
1461 no*)
1462 # Fortran is disabled; ignore this option (if present)
1463 BLASLIB=
1464 ;;
1465 *no)
1466 # It is an error if the user chooses to build without
1467 # the BLAS library if Fortran is enabled.
1468 AC_MSG_ERROR([Bad option '--without-blas'
1469 To support Fortran calls, ASCEND must be compiled with a blas library])
1470 ;;
1471 *build)
1472 # Fortran is enabled and the user specified --with-blas=build
1473 # For a search for BLAS source code and tell the Makefile
1474 # to build it; useful for testing configure.
1475 blas_src_file="$srcdir/blas/dcopy.f"
1476 AC_MSG_CHECKING([for blas source file $blas_src_file ])
1477 if test -f $blas_src_file ; then
1478 AC_MSG_RESULT(yes)
1479 BLASLIB="$ascpwd/ascend4/archive/libascblas.a"
1480 make_blaslib='make-blaslib'
1481 blaslib_makefile="blas/Makefile"
1482 asc_subdirs="$asc_subdirs ../blas"
1483 else
1484 AC_MSG_RESULT(no)
1485 AC_MSG_ERROR([User specified '--with-blas=build' but
1486 configure cannot find the blas source file $blas_src_file])
1487 fi
1488 ;;
1489 *yes)
1490 # Fortran in enabled and the user didn't give the --with-blas
1491 # option or didn't give the library's location.
1492 # Search for a compiled libblas.a or libascblas.a; if that
1493 # fails, look for BLAS source code; if that also fails,
1494 # disable all Fortran and print a warning.
1495 AC_PATH_PROGS(BLASLIB, libblas.a libascblas.a, , $asc_f77_support_dirs)
1496 blas_src_file="$srcdir/blas/dcopy.f"
1497 if test -z "$BLASLIB" -a -n "$blas_src_file" ; then
1498 AC_MSG_CHECKING([for blas source file $blas_src_file ])
1499 if test -f $blas_src_file ; then
1500 AC_MSG_RESULT(yes)
1501 BLASLIB="$ascpwd/ascend4/archive/libascblas.a"
1502 make_blaslib='make-blaslib'
1503 blaslib_makefile="blas/Makefile"
1504 asc_subdirs="$asc_subdirs ../blas"
1505 else
1506 AC_MSG_RESULT(no)
1507 fi
1508 fi
1509 if test -z "$BLASLIB" ; then
1510 with_fortran=no
1511 AC_MSG_WARN([Cannot find libblas.a, libascblas.a, nor blas
1512 source code. Building ASCEND without integration, MINOS, and CONOPT
1513 support. To specify a specific location for the blas library, run
1514 configure again with the argument:
1515 --with-blas=BLASLIB
1516 where BLASLIB is the full path to the blas library file.])
1517 fi
1518 ;;
1519 *)
1520 # The user gave us --with-blas=BLASLIB, use that as the
1521 # location of the BLAS library.
1522 BLASLIB="$with_blas"
1523 ;;
1524 esac
1525
1526
1527 # Initialize the linpack variables
1528 make_lpaklib=''
1529
1530 AC_ARG_WITH(linpack,
1531 [ --with-linpack=LPAKLIB The full path to the linpack library.
1532 Use '--with-linpack=build' to build the library
1533 from the sources that come with the distribution.],
1534 , [with_linpack=yes] )
1535 case "$with_fortran$with_linpack" in
1536 no*)
1537 # Fortran is disabled; ignore this option (if present)
1538 LPAKLIB=
1539 ;;
1540 *no)
1541 # It is an error if the user chooses to build without
1542 # the LINPACK library if Fortran is enabled.
1543 AC_MSG_ERROR([Bad option '--without-linpack'
1544 To support Fortran calls, ASCEND must be compiled with a
1545 linpack library.])
1546 ;;
1547 *build)
1548 # Fortran is enabled and the user specified --with-linpack=build
1549 # For a search for LINPACK source code and tell the Makefile
1550 # to build it; useful for testing configure.
1551 lpak_src_file="$srcdir/linpack/d1mach.f"
1552 AC_MSG_CHECKING([for linpack source file $lpak_src_file ])
1553 if test -f $lpak_src_file ; then
1554 AC_MSG_RESULT(yes)
1555 LPAKLIB="$ascpwd/ascend4/archive/libasclpak.a"
1556 make_lpaklib='make-lpaklib'
1557 lpaklib_makefile="linpack/Makefile"
1558 asc_subdirs="$asc_subdirs ../linpack"
1559 else
1560 AC_MSG_RESULT(no)
1561 AC_MSG_ERROR([User specified '--with-linpack=build' but
1562 configure cannot find the linpack source file $lpak_src_file])
1563 fi
1564 ;;
1565 *yes)
1566 # Fortran in enabled and the user didn't give the --with-linpack
1567 # option or didn't give the library's location.
1568 # Search for a compiled liblpak.a or libasclpak.a; if that
1569 # fails, look for LINPACK source code; if that also fails,
1570 # disable all Fortran and print a warning.
1571 AC_PATH_PROGS(LPAKLIB, liblpak.a libasclpak.a, , $asc_f77_support_dirs)
1572 lpak_src_file="$srcdir/linpack/d1mach.f"
1573 if test -z "$LPAKLIB" -a -n "$lpak_src_file" ; then
1574 AC_MSG_CHECKING([for linpack source file $lpak_src_file ])
1575 if test -f $lpak_src_file ; then
1576 AC_MSG_RESULT(yes)
1577 LPAKLIB="$ascpwd/ascend4/archive/libasclpak.a"
1578 make_lpaklib='make-lpaklib'
1579 lpaklib_makefile="linpack/Makefile"
1580 asc_subdirs="$asc_subdirs ../linpack"
1581 else
1582 AC_MSG_RESULT(no)
1583 fi
1584 fi
1585 if test -z "$LPAKLIB" ; then
1586 with_fortran=no
1587 AC_MSG_WARN([Cannot find liblpak.a, libasclpak.a, nor linpack
1588 source code. Building ASCEND without integration, MINOS, and CONOPT
1589 support. To specify a specific location for the linpack library, run
1590 configure again with the argument:
1591 --with-linpack=LPAKLIB
1592 where LPAKLIB is the full path to the linpack library file.])
1593 fi
1594 ;;
1595 *)
1596 # The user gave us --with-linkpack=LINKPACKLIB, use that
1597 # as the location of the LINKPACK library.
1598 LPAKLIB="$with_linpack"
1599 ;;
1600 esac
1601
1602
1603 # Initialize the lsod variables
1604 make_lsodlib=''
1605 HAVE_LSOD=''
1606
1607 AC_ARG_WITH(lsod,
1608 [ --with-lsod=LSODLIB The full path to the lsod library.
1609 Use '--with-lsod=build' to build the lsod library
1610 from the sources that come with the distribution.],
1611 , [with_lsod=yes] )
1612 case "$with_fortran$with_lsod" in
1613 no*)
1614 # Fortran is disabled; ignore this option (if present)
1615 LSODLIB=
1616 with_lsod=no
1617 ;;
1618 *no)
1619 # Fortran is enabled but the user specified --without-lsod
1620 LSODLIB=
1621 ;;
1622 *build)
1623 # Fortran is enabled and the user specified --with-lsod=build
1624 # For a search for LSOD source code and tell the Makefile
1625 # to build it; useful for testing configure.
1626 lsod_src_file="$srcdir/lsod/lsode.f"
1627 AC_MSG_CHECKING([for lsod source file $lsod_src_file ])
1628 if test -f $lsod_src_file ; then
1629 AC_MSG_RESULT(yes)
1630 LSODLIB="$ascpwd/ascend4/archive/libinteg.a"
1631 make_lsodlib='make-lsodlib'
1632 lsodlib_makefile="lsod/Makefile"
1633 asc_subdirs="$asc_subdirs ../lsod"
1634 HAVE_LSOD='-DSTATIC_LSOD'
1635 else
1636 AC_MSG_RESULT(no)
1637 AC_MSG_ERROR([User specified '--with-lsod=build' but
1638 configure cannot find the lsod source file $lsod_src_file])
1639 fi
1640 ;;
1641 *yes)
1642 # Fortran in enabled and the user didn't give the --with-lsod
1643 # option or didn't give the library's location.
1644 # Search for a compiled libinteg.a; if that fails, look
1645 # for LSOD source code; if that also fails, disable LSOD
1646 # and print a warning.
1647 AC_PATH_PROGS(LSODLIB, libinteg.a libasclsod.a, , $asc_f77_support_dirs)
1648 lsod_src_file="$srcdir/lsod/lsode.f"
1649 if test -z "$LSODLIB" -a -n "$lsod_src_file" ; then
1650 AC_MSG_CHECKING([for lsod source file $lsod_src_file ])
1651 if test -f $lsod_src_file ; then
1652 AC_MSG_RESULT(yes)
1653 LSODLIB="$ascpwd/ascend4/archive/libinteg.a"
1654 make_lsodlib='make-lsodlib'
1655 lsodlib_makefile="lsod/Makefile"
1656 asc_subdirs="$asc_subdirs ../lsod"
1657 else
1658 AC_MSG_RESULT(no)
1659 fi
1660 fi
1661 if test -z "$LSODLIB" ; then
1662 with_lsod=no
1663 AC_MSG_WARN([Cannot find libinteg.a nor the lsod
1664 source code. Building ASCEND without integration
1665 support. To specify a specific location for the lsod library, run
1666 configure again with the argument:
1667 --with-lsod=LSODLIB
1668 where LSODLIB is the full path to the lsod integration library file.])
1669 else
1670 HAVE_LSOD='-DSTATIC_LSOD'
1671 fi
1672 ;;
1673 *)
1674 # The user gave us --with-lsod=LSODLIB, use that as the
1675 # location of the LSOD library and define -DSTATIC_LSOD.
1676 LSODLIB="$with_lsod"
1677 HAVE_LSOD='-DSTATIC_LSOD'
1678 ;;
1679 esac
1680
1681
1682 #--------------------------------------------------------------------
1683 # Other trees which may or may not be present. If present,
1684 # generate the Makefiles in the tree unless the user passes in
1685 # a --without-<package> argument.
1686 #
1687 # Valid <package> values are: TK, models, help
1688 #
1689 # We could have `configure' do this for us via
1690 # AC_CONFIG_SUBDIRS, but `configure' scripts in the trees can
1691 # only be one directory removed from this configure script.
1692 # For example, it would be nice to have `models' under
1693 # `ascend4', but `configure' doesn't like `ascend4/models' as
1694 # an argument to AC_CONFIG_SUBDIRS.
1695 #
1696 # To get around this problem, we do things by hand. :-)
1697 #
1698 # If the user gives a --without-<package> argument, we have
1699 # nothing to do for that package.
1700 #
1701 # Otherwise,
1702 # * Set `subdir_file_exists' to a file that should exist in the
1703 # subtree---this is how we know that the subtree is really
1704 # there.
1705 # * Set `subdir_locations' to the list of locations, relative
1706 # to this configure script, where the subtree may live.
1707 # * Set `subdir_output' to the list of makefiles to generate;
1708 # the variable `subdir_root' in this list will be replaced
1709 # with the correct value from `subdir_locations'.
1710 #
1711 # To see which (if any) of the values in `subdir_locations' is
1712 # the correct one, we set `subdir_root' to each value in
1713 # `subdir_locations' and check for the existence of
1714 # $fullpathsrcdir/$subdir_root/$subdir_file_exists, where
1715 # $fullpathsrcdir is the full path to the source directory. If
1716 # that file exists, we
1717 # * Set <package>_dir_root to ../$subdir_root. The "../" is
1718 # needed since this value is used in the `ascend4' directory
1719 # and $subdir_root is relative to the parent of `ascend4'.
1720 # * Substitute the value of $subdir_root into `subdir_output'
1721 # and set the result to <package>_makefiles: the list of
1722 # Makefiles for configure to generate.
1723 # * Each package needs to be able to find its way back to
1724 # ascend4/ConfigAscend; it needs to go back up the tree
1725 # however many levels deep it is---i.e., `foo/bar/baz' should
1726 # become `../../..' and this does it: sed 's,[^/][^/]*,..,g'
1727 # but we need to quote the [] from m4, so we get this bizarre
1728 # thing: sed 's,[[^/][^/]]*,..,g' Set <package>_topbuilddir
1729 # to this result.
1730 # * Exit the loop.
1731 #--------------------------------------------------------------------
1732
1733 # Initialize variables
1734 tkdir_root=''
1735 tkdir_topbuilddir=''
1736
1737 AC_ARG_WITH(tkdir,
1738 [Generation of Makefiles:
1739 --without-tkdir do not generate Makefiles in the TK subdir],
1740 , [with_tkdir=yes])
1741 if test ! "X$with_tkdir" = "Xno" ; then
1742 subdir_file_exists='AscendRC'
1743 subdir_locations='ascend4/TK'
1744 subdir_output='
1745 $subdir_root/Makefile
1746 $subdir_root/Makefile.Rules:$subdir_root/Makefile.Rules.in
1747 $subdir_root/bitmaps/Makefile
1748 $subdir_root/templates/Makefile
1749 '
1750 for subdir_root in $subdir_locations ; do
1751 if test -f $fullpathsrcdir/$subdir_root/$subdir_file_exists ; then
1752 tkdir_root="../$subdir_root"
1753 tkdir_makefiles=`eval echo $subdir_output`
1754 tkdir_topbuilddir=`echo "$subdir_root" | sed 's,[[^/][^/]]*,..,g'`
1755 break
1756 fi
1757 done
1758 fi
1759
1760 # Initialize variables
1761 models_dir_root=''
1762 models_topbuilddir=''
1763
1764 AC_ARG_WITH(models,
1765 [ --without-models do not generate Makefiles in the models subdir],
1766 , [with_models=yes])
1767 if test ! "X$with_models" = "Xno" ; then
1768 subdir_file_exists='system.a4l'
1769 subdir_locations='models ascend4/models'
1770 subdir_output='
1771 $subdir_root/Makefile
1772 $subdir_root/Makefile.Rules:$subdir_root/Makefile.Rules.in
1773 $subdir_root/ben/Makefile
1774 '
1775 ## $subdir_root/examples/Makefile
1776 ## $subdir_root/examples/abbott/Makefile
1777 ## $subdir_root/examples/flexible_design/Makefile
1778 ## $subdir_root/libraries/Makefile
1779 ## $subdir_root/libraries/abbott/Makefile
1780 ## $subdir_root/pending/Makefile
1781 ## $subdir_root/pending/examples/Makefile
1782 ## $subdir_root/pending/libraries/Makefile
1783 for subdir_root in $subdir_locations ; do
1784 if test -f $fullpathsrcdir/$subdir_root/$subdir_file_exists ; then
1785 models_dir_root="../$subdir_root"
1786 models_makefiles=`eval echo $subdir_output`
1787 models_topbuilddir=`echo "$subdir_root" | sed 's,[[^/][^/]]*,..,g'`
1788 break
1789 fi
1790 done
1791 fi
1792
1793
1794 # Initialize variables
1795 help_dir_root=''
1796 help_topbuilddir=''
1797
1798 dnl >>>>AC_ARG_WITH(help,
1799 dnl >>>> [ --without-help do not generate Makefiles in the help subdir],
1800 dnl >>>> , [with_help=yes])
1801 dnl >>>>if test ! "X$with_help" = "Xno" ; then
1802 dnl >>>> subdir_file_exists='ascend-helpTOC.htm'
1803 dnl >>>> subdir_locations='help ascend4/help'
1804 dnl >>>> subdir_output='
1805 dnl >>>> $subdir_root/Makefile
1806 dnl >>>> $subdir_root/Makefile.Rules:$subdir_root/Makefile.Rules.in
1807 dnl >>>> $subdir_root/Screenshots/Makefile
1808 dnl >>>> '
1809 dnl >>>> for subdir_root in $subdir_locations ; do
1810 dnl >>>> if test -f $fullpathsrcdir/$subdir_root/$subdir_file_exists ; then
1811 dnl >>>> help_dir_root="../$subdir_root"
1812 dnl >>>> help_makefiles=`eval echo $subdir_output`
1813 dnl >>>> help_topbuilddir=`echo "$subdir_root" | sed 's,[[^/][^/]]*,..,g'`
1814 dnl >>>> break
1815 dnl >>>> fi
1816 dnl >>>> done
1817 dnl >>>>fi
1818
1819
1820 #--------------------------------------------------------------------
1821 # The variables we substitute into the Makefile.in files
1822 # and the command to actually generate the Makefiles
1823 #--------------------------------------------------------------------
1824 AC_SUBST(ascpwd)
1825 AC_SUBST(fullpathsrcdir)
1826 AC_SUBST(asc_include)
1827 AC_SUBST(CC)
1828 AC_SUBST(CFLAGS)
1829 AC_SUBST(LEX)
1830 AC_SUBST(LEXLIB)
1831 AC_SUBST(scanner_src)
1832 AC_SUBST(typer_src)
1833 AC_SUBST(MATH_LIBS)
1834 AC_SUBST(DEBUG_LIBS)
1835 AC_SUBST(X11_INCLUDES)
1836 AC_SUBST(X11_LIBRARIES)
1837 AC_SUBST(X11_RUN_PATH)
1838 AC_SUBST(X11_EXTRA_LIBS)
1839 AC_SUBST(DL_LIBS)
1840 AC_SUBST(LD_FLAGS)
1841 AC_SUBST(LD_SEARCH_FLAGS)
1842 AC_SUBST(SHLIB_CFLAGS)
1843 AC_SUBST(SHLIB_LD)
1844 AC_SUBST(SHLIB_LD_LIBS)
1845 AC_SUBST(SHLIB_SUFFIX)
1846 AC_SUBST(ASC_LIB_SUFFIX)
1847 AC_SUBST(TCL_LIB)
1848 AC_SUBST(TCL_HDR)
1849 AC_SUBST(TK_LIB)
1850 AC_SUBST(TK_HDR)
1851 AC_SUBST(TKTABLE_LIB)
1852 AC_SUBST(ASC_TK_LIBRARY)
1853 AC_SUBST(ASC_TCL_LIBRARY)
1854 AC_SUBST(HAVE_TKTABLE)
1855 AC_SUBST(asc_subdirs)
1856 AC_SUBST(F77)
1857 AC_SUBST(F77LIBS)
1858 AC_SUBST(BLASLIB)
1859 AC_SUBST(make_blaslib)
1860 AC_SUBST(LPAKLIB)
1861 AC_SUBST(make_lpaklib)
1862 AC_SUBST(LSODLIB)
1863 AC_SUBST(make_lsodlib)
1864 AC_SUBST(HAVE_LSOD)
1865 AC_SUBST(OPTSQPLIB)
1866 AC_SUBST(make_rsqplib)
1867 AC_SUBST(HAVE_OPTSQP)
1868 dnl AC_SUBST(HARWELLLIB)
1869 dnl AC_SUBST(make_harwelllib)
1870 dnl AC_SUBST(HAVE_HARWELL)
1871 AC_SUBST(MINOSLIB)
1872 AC_SUBST(make_minoslib)
1873 AC_SUBST(HAVE_MINOS)
1874 AC_SUBST(CONOPTLIB)
1875 AC_SUBST(make_conoptlib)
1876 AC_SUBST(HAVE_CONOPT)
1877 AC_SUBST(tkdir_root)
1878 AC_SUBST(tkdir_topbuilddir)
1879 AC_SUBST(models_dir_root)
1880 AC_SUBST(models_topbuilddir)
1881 AC_SUBST(help_dir_root)
1882 AC_SUBST(help_topbuilddir)
1883
1884 AC_OUTPUT(
1885 ascend4/ConfigAscend:ascend4/ConfigAscend.in
1886 ascend4/Makefile
1887 ascend4/bin/ascend4.sh
1888 ascend4/Makefile.Rules:ascend4/Makefile.Rules.in
1889 ascend4/archive/Makefile
1890 ascend4/bin/Makefile
1891 ascend4/compiler/Makefile
1892 ascend4/general/Makefile
1893 ascend4/interface/Makefile
1894 ascend4/lib/Makefile
1895 ascend4/packages/Makefile
1896 ascend4/solver/Makefile
1897 ascend4/utilities/Makefile
1898 $tkdir_makefiles
1899 $models_makefiles
1900 $help_makefiles
1901 $blaslib_makefile
1902 $lpaklib_makefile
1903 $lsodlib_makefile
1904 $rsqplib_makefile
1905 $conoptlib_makefile
1906 $minoslib_makefile
1907 )

john.pye@anu.edu.au
ViewVC Help
Powered by ViewVC 1.1.22